
V . A S S E M B L Y
VERSA SEAT ASSEMBLY
The Versa Seat is standard equipment on the Jazzy 1400. For assembly, please refer to the instruction manual supplied with the Versa Seat.
OPTIONAL SEATING ASSEMBLY
To reduce the possibility of shipping damage, some Jazzy 1400 seats are removed from the power base, and the
Parts List | Quantity |
4 | |
1 | |
4 |
NOTE: Because of the variety of optional seating configurations, the Jazzys in the assembly photographs may differ slightly from the product you purchased.
SEAT-BACK ASSEMBLY
The
To mount the seat-back to the hinge:
1.Line up the hinges with the holes in the
2.Insert the
3.Use a Phillips screwdriver to tighten the four screws.
SEAT INSTALLATION (SEAT WITH H-FRAME)
The standard seat installation method incorporates the seat frame (H- frame) and four (4) adjustable seat posts located on the power base.
To install the seat:
1.Position the seat on the rear seat towers. See figure 10.
2.Push the seat back and down until the latches engage on the front seat towers. See figure 11.
3.Plug the controller cable into the connector on the utility tray. See figure 12.
ATTACH
HERE
Figure 9. Seat-Back Assembly
Figure 10. Rear Towers
16 | www.pridemobility.com | Jazzy 1400/Rev C/Sept02 |