V I . C O M F O R T A D J U S T M E N T S
ARMREST ANGLE (MEDIUM/HIGHBACK/RECLINER)
You can adjust the armrest angle to fit your specific needs. See figure 17.
To change the armrest angle:
1.Lift the armrest straight up so that it is perpendicular to the floor.
2.Use a
3.Use a
4.Turn the screw clockwise to raise the front of the armrest, or turn the screw counterclockwise to lower the front of the armrest.
5.Lock the adjusting screw into place by tightening the locking nut.
ARMREST HEIGHT (OPTIONAL)
Your Jazzy may be equipped with
To change the armrest height:
1.Remove the ball detent pin from the armrest.
2.Move the armrest up or down to the desired height.
3.Align the holes and insert the ball detent pin.
4.For permanent positioning, tighten the setscrew.
JOYSTICK EXTENSION
The joystick control can easily slide out away from the armrest, or in toward the armrest. See figure 18.
To extend the joystick:
1.Use a
2.Slide the joystick mounting bracket into or out of the armrest to the desired position.
3.Tighten the setscrew by turning it clockwise.
SWING-AWAY JOYSTICK
Your Jazzy may be equipped with a
TURN THIS SCREW TO CHANGE ARMREST ANGLE
LOCKING NUT
LOCKS
ADJUSTMENT
SCREW IN
PLACE
Figure 17. Armrest Angle
Adjustment
LOOSEN THIS SETSCREW
TO ADJUST JOYSTICK
Figure 18. Joystick Extension
Figure 19. Swing-Away Joystick (Forward Position)
Figure 20. Swing-Away Joystick (Retracted Position)
Jazzy 1400/Rev C/Sept02 | www.pridemobility.com | 19 |