Kerb climber
Fitting and removal procedure
1.Locate the kerb climber bar into the left hand location bracket and push the bar against the spring (Fig. 45).
2.Hold the kerb climber with your right hand over the locking lever and release the locking pin.
3.Align the two pins on the right hand side of the bar with the cut outs on the right hand location bracket.
4.Allow the tension in the spring to locate the kerb climber into the right hand location bracket.
5.Release the locking lever and ensure the locking pin is correctly positioned in the locating hole (Fig. 46).
6.Reverse the procedure to remove the kerb climber.
Fig. 45
Location pins and slots
Location bracket in locked position
Fig. 46
31 | F45 Issue 6 |
|
|