Batteries and charging
Procedure for connecting the charger and charging
1The wheelchair can be charged via one of two charging sockets. The charger socket most convenient and often used is located on the front of the Pilot/ Pilot+ Control Box (Fig. 54A). The other charger socket is located on the rear of the battery boxes (Fig. 54B). The charger socket on the battery box is useful should you require to charge the batteries independently from the chair, to do this remove the batteries and charge in a more convenient location making sure that the two batteries are connected together.
2Connect the charger to the mains supply by means of the mains plug and switch on. The yellow ‘mains on’ indicator should light up immediately (Fig. 55), followed shortly afterwards by the orange ‘charging’ indicator.
3The battery is fully charged when the green ‘charge complete’ light illuminates. if not needed for use the battery may be left charging indefinitely without risk of damage.
4If the chair is required for use before the ‘charge complete light’ shows, then it is possible to obtain restricted use once the ‘bulk charge’ light has illuminated.
Pilot control box | 3 pin charger plug |
Pilot+ Control box
Charger socket
Fig. 54A Control Box
3 pin charger socket on rear of battery box
Fig. 54B
Yellow ‘mains on’
Orange ‘charging’
Yellow ‘bulk charge complete’
Green ‘charge complete’
Fig. 55
F45 Issue 6 | 40 |
|
|