Shoprider Streamer 888WB, Streamer 888WAB manual Programmable Controller, Preparation For Use, ~13~

Page 14

PROGRAMMABLE CONTROLLER

GMP

ISO9001

ISO14001

ISO13485

CERTIFIED

PREPARATION FOR USE

NOTE: Before using the Powerchair for the first time, be sure the batteries have

been connected. Charge the Powerchair for at least 6-8 hours prior to first time use.

NOTE! Maximum efficiency can only be achieved with sufficient battery power and adequate run-up distance.

WARNING! Be aware that the angle of incidence should be approached around 90° to ensure safety and stability.

PROGRAMMABLE CONTROLLER

WIZZ (888WNL-11), STREAMER (888WAB-11, 888WB-11, 888WSB-11), JETSTREAM-L (888WAL-11), JETSTREAM-M (888WAM-11) Powerchairs have programmable controllers. For more information regarding the programming parameters for the programmable Powerchair controller please contact your provider.

Note: WIZZ (888WNL-10), STREAMER (888WAB-10, 888WB-10, 888WSB-10), JETSTREAM-L (888WAL-10), JETSTREAM-M (888WAM-10), are non-programmable Powerchairs.

~13~

Image 14

Contents STREAMER 888WB MEDICAL POWER WHEELCHAIRUser Manual STREAMER 888WABCONTENTS WIZZ 888WNL FEATURE GUIDEINTRODUCTION STREAMER 888WB/888WSB STREAMER 888WABJEETSTREAM-M 888WAM JETSTREAM-L 888WALEMI WARNING ELECTROMAGNETIC INTERFERENCE EMI FROM RADIO WAVE SOURCESPOWERCHAIR ELECTROMAGNETIC INTERFERENCE EMI WARNINGSSAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Chassis Shroud of WIZZ 888WNL WARNING, CAUTION AND INDICATION LABEL LOCATIONJoystick Controller Chassis Shroud of STREAMER 888WB/888WSB WARNING,CAUTIONANDINDICATIONLABELLOCATIONChassis Shroud of STREAMER 888WAB ~10~YELLOW - CHARGING GREEN - CHARGED Chassis Shroud of JETSTREAM-L/M 888WAL/888WAM~11~ PREPARATION FOR USE Fig. 8aPROGRAMMABLE CONTROLLER ~13~ANGLE ADJUSTMENT PROCEDURESLENGTH HEIGHTFOOTREST ADJUSTMENTS Fig. 11 JETSTREAM-L/M 888-WAL/WAM Safety Belt SEAT HEIGHT ADJUSTMENTS Fig.13SAFETY BELT AND FASTENING STRAP SETTING Fig.13 Fastening StrapMaximum Speed Indicator OPERATION INSTRUCTIONSBattery Gauge GETTING READY TO KNOW THE JOYSTICK CONTROLLER VSI On / Off ButtonENGAGED / DISENGAGED MODE Charging Port 8 for Off-Board ChargerGETTING READY TO DRIVE COMPONENTS FOR STREAMER 888WB/WAB/WSB DISASSEMBLY & ASSEMBLY INSTRUCTIONSCOMPONENTS FOR WIZZ 888WNL COMPONENTS FOR JETSTREAM -L/M 888WAL/WAMDISASSEMBLY PROCEDURES To reassemble the Powerchair, reverse the procedures described aboveWARNING! Only use the original manufacturer approved charger BATTERIES & BATTERY CHARGINGBATTERIES 1. Grasp the charging port cover and remove it from the charging port ~23~ TROUBLE SHOOTING ~24~~25~ SPECIFICATION ~26~QUARTERLY INSPECTION ~27~DISCLAIMER