Shoprider Jetstream-M 888WAM Adjustment Procedures, Seat Height Adjustments, Fastening Strap

Page 17
SEAT HEIGHT ADJUSTMENTS (Fig.13)

GMP

ISO9001

ISO14001

ISO13485

CERTIFIED

ADJUSTMENT PROCEDURES

JOYSTICK CONVERSION (right to left or left to right)

Beneath each of the arm pads there is a hand knob [Fig.10 (2)] used to adjust the length of the arm pad and secure the arm pad to the arm rest assembly. Remove the hand knob completely and slide off the arm pad. You can now exchange the joystick controller from one side to the other.

SEAT HEIGHT ADJUSTMENTS (Fig.13)

WIZZ (888WNL): The four seat supporting posts under the seat have three height adjustment holes each. By fitting the retaining pin in any one of the holes, three heights can be achieved.

STREAMER (888WB/WAB/WSB): The tube receiving seat stem has three (STREAMER 888WB/WAB) or two (STREAMER 888WSB) height adjustment holes. By fitting a steel bolt in any one of the holes, the selected heights can be achieved.

JETSTREAM-L/M (888WAL/WAM): The front and rear tube receiving posts have three height adjustment holes. By fitting a steel bolt in any one of the holes, the selected heights can be achieved.

SAFETY BELT AND FASTENING STRAP SETTING (Fig.13)

The installing or setting-up method is described as Fig.13.

Fastening Strap

Safety Belt

 

 

 

 

 

 

 

 

 

 

 

Fig. 13

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

STREAMER 888WB/WAB

JETSTREAM-L/M 888WAL/WAM

WIZZ 888WNL

 

STREAMER 888WSB

 

 

 

~16~

Image 17
Contents User Manual MEDICAL POWER WHEELCHAIRSTREAMER 888WB STREAMER 888WABCONTENTS WIZZ 888WNL FEATURE GUIDEINTRODUCTION STREAMER 888WAB STREAMER 888WB/888WSBJETSTREAM-L 888WAL JEETSTREAM-M 888WAMELECTROMAGNETIC INTERFERENCE EMI FROM RADIO WAVE SOURCES EMI WARNINGWARNINGS POWERCHAIR ELECTROMAGNETIC INTERFERENCE EMISAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Chassis Shroud of WIZZ 888WNL WARNING, CAUTION AND INDICATION LABEL LOCATIONJoystick Controller Chassis Shroud of STREAMER 888WAB WARNING,CAUTIONANDINDICATIONLABELLOCATIONChassis Shroud of STREAMER 888WB/888WSB ~10~YELLOW - CHARGING GREEN - CHARGED Chassis Shroud of JETSTREAM-L/M 888WAL/888WAM~11~ Fig. 8a PREPARATION FOR USE~13~ PROGRAMMABLE CONTROLLERLENGTH ADJUSTMENT PROCEDURESANGLE HEIGHTFOOTREST ADJUSTMENTS Fig. 11 JETSTREAM-L/M 888-WAL/WAM SAFETY BELT AND FASTENING STRAP SETTING Fig.13 SEAT HEIGHT ADJUSTMENTS Fig.13Safety Belt Fastening StrapBattery Gauge OPERATION INSTRUCTIONSMaximum Speed Indicator GETTING READY TO KNOW THE JOYSTICK CONTROLLER VSI On / Off ButtonENGAGED / DISENGAGED MODE Charging Port 8 for Off-Board ChargerGETTING READY TO DRIVE COMPONENTS FOR WIZZ 888WNL DISASSEMBLY & ASSEMBLY INSTRUCTIONSCOMPONENTS FOR STREAMER 888WB/WAB/WSB COMPONENTS FOR JETSTREAM -L/M 888WAL/WAMTo reassemble the Powerchair, reverse the procedures described above DISASSEMBLY PROCEDURESWARNING! Only use the original manufacturer approved charger BATTERIES & BATTERY CHARGINGBATTERIES 1. Grasp the charging port cover and remove it from the charging port ~23~ ~24~ TROUBLE SHOOTING~25~ ~26~ SPECIFICATION~27~ QUARTERLY INSPECTIONDISCLAIMER