Shoprider Steamer 888WSB manual Emi Warning, Powerchair Electromagnetic Interference Emi, Warnings

Page 7
POWERCHAIR ELECTROMAGNETIC INTERFERENCE (EMI)

GMP

ISO9001

ISO14001

ISO13485

CERTIFIED

EMI WARNING

POWERCHAIR ELECTROMAGNETIC INTERFERENCE (EMI)

Because EM energy rapidly becomes more intense as one moves closer to the transmitting antenna (source), the EM fields from hand-held radio sources (transceivers) are of special concern. It is possible to unintentionally bring high levels of EM energy very close to the Powerchair’s control system while using these devices. This can affect Powerchair movement and braking. Therefore, the warnings listed below are recommended to prevent possible interference with the control system of the Powerchair.

WARNINGS

1.Do not operate hand-held transceivers (transmitters-receivers), such as citizens band (CB) radios, or turn ON personal communication devices, such as cellular phones, while the Powerchair is turned ON.

2.Be aware of nearby transmitters, such as radio or TV stations, and try to avoid coming close to them.

3.If unintended movement or brake release occurs, turn the Powerchair OFF as soon as it is safe.

4.Be aware that adding accessories or components, or modifying the Powerchair, may make it more susceptible to EMI.

NOTE! There is no easy way to evaluate the overall immunity of the Powerchair.

5.Report all incidents of unintended movement or braking to the Powerchair provider, and note whether there are sources of EMI nearby.

~6~

Image 7
Contents STREAMER 888WAB MEDICAL POWER WHEELCHAIRUser Manual STREAMER 888WBCONTENTS INTRODUCTION FEATURE GUIDEWIZZ 888WNL STREAMER 888WAB STREAMER 888WB/888WSBJETSTREAM-L 888WAL JEETSTREAM-M 888WAMELECTROMAGNETIC INTERFERENCE EMI FROM RADIO WAVE SOURCES EMI WARNINGWARNINGS POWERCHAIR ELECTROMAGNETIC INTERFERENCE EMISAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Joystick Controller WARNING, CAUTION AND INDICATION LABEL LOCATIONChassis Shroud of WIZZ 888WNL ~10~ WARNING,CAUTIONANDINDICATIONLABELLOCATIONChassis Shroud of STREAMER 888WAB Chassis Shroud of STREAMER 888WB/888WSB~11~ Chassis Shroud of JETSTREAM-L/M 888WAL/888WAMYELLOW - CHARGING GREEN - CHARGED Fig. 8a PREPARATION FOR USE~13~ PROGRAMMABLE CONTROLLERHEIGHT ADJUSTMENT PROCEDURESLENGTH ANGLEFOOTREST ADJUSTMENTS Fig. 11 JETSTREAM-L/M 888-WAL/WAM Fastening Strap SEAT HEIGHT ADJUSTMENTS Fig.13SAFETY BELT AND FASTENING STRAP SETTING Fig.13 Safety BeltGETTING READY TO KNOW THE JOYSTICK CONTROLLER VSI On / Off Button OPERATION INSTRUCTIONSBattery Gauge Maximum Speed IndicatorGETTING READY TO DRIVE Charging Port 8 for Off-Board ChargerENGAGED / DISENGAGED MODE COMPONENTS FOR JETSTREAM -L/M 888WAL/WAM DISASSEMBLY & ASSEMBLY INSTRUCTIONSCOMPONENTS FOR WIZZ 888WNL COMPONENTS FOR STREAMER 888WB/WAB/WSBTo reassemble the Powerchair, reverse the procedures described above DISASSEMBLY PROCEDURESBATTERIES BATTERIES & BATTERY CHARGINGWARNING! Only use the original manufacturer approved charger 1. Grasp the charging port cover and remove it from the charging port ~23~ ~24~ TROUBLE SHOOTING~25~ ~26~ SPECIFICATION~27~ QUARTERLY INSPECTIONDISCLAIMER