Shoprider Steamer 888WSB, Streamer 888WAB, Streamer 888WB, Wizz 888WNL manual Preparation For Use

Page 13
PREPARATION FOR USE

GMP

ISO9001

ISO14001

ISO13485

CERTIFIED

PREPARATION FOR USE

The Powerchair has many features designed to give the user maximum comfort. Adjustments can be made to the following parts of the Powerchair:

(1)Footrest can be lengthened outward from the main frame in three positions.

(2)Footrest angle can be adjusted from 00 to 600.

(3)Armrests can be set at different angles.

(4)Armrests can be set at different lengths.

(5)Arms can be adjusted in height.

(6)Arms can be adjusted in width.

(7)Joystick controller can be fitted for either right or left hand use (no tools required).

(8)Seat supporting posts with retaining pins can be adjusted in height.

(9)Backrest angle can be slightly adjusted from 900 to 1020.

Adjustments should be carried out by a provider/attendant while the user is seated in the Powerchair with the Powerchair turned off (the seat height adjustment is made when the user is out of seat).

Curb Skipper, patented/ patent pending worldwide, is a sophisticated device that is specifically designed to overcome the height of curbs, and yet still retains the mobility of a normal castor. Our designated maximum climbing height for this device is 63.5 mm/ 2.5 inches. To safely mount a curb, please follow the instruction below:

STEP 1 Set the Maximum Speed Indicator at 3 (recommended) by adjusting the Speed Increase / Decrease Button (Fig.14).

STEP 2 Approach the curb from a comfortable distance, and push the joystick all the way forward.

Fig. 8a

~12~

Image 13
Contents User Manual MEDICAL POWER WHEELCHAIRSTREAMER 888WB STREAMER 888WABCONTENTS INTRODUCTION FEATURE GUIDEWIZZ 888WNL STREAMER 888WAB STREAMER 888WB/888WSBJETSTREAM-L 888WAL JEETSTREAM-M 888WAMELECTROMAGNETIC INTERFERENCE EMI FROM RADIO WAVE SOURCES EMI WARNINGWARNINGS POWERCHAIR ELECTROMAGNETIC INTERFERENCE EMISAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Joystick Controller WARNING, CAUTION AND INDICATION LABEL LOCATIONChassis Shroud of WIZZ 888WNL Chassis Shroud of STREAMER 888WAB WARNING,CAUTIONANDINDICATIONLABELLOCATIONChassis Shroud of STREAMER 888WB/888WSB ~10~~11~ Chassis Shroud of JETSTREAM-L/M 888WAL/888WAMYELLOW - CHARGING GREEN - CHARGED Fig. 8a PREPARATION FOR USE~13~ PROGRAMMABLE CONTROLLERLENGTH ADJUSTMENT PROCEDURESANGLE HEIGHTFOOTREST ADJUSTMENTS Fig. 11 JETSTREAM-L/M 888-WAL/WAM SAFETY BELT AND FASTENING STRAP SETTING Fig.13 SEAT HEIGHT ADJUSTMENTS Fig.13Safety Belt Fastening StrapBattery Gauge OPERATION INSTRUCTIONSMaximum Speed Indicator GETTING READY TO KNOW THE JOYSTICK CONTROLLER VSI On / Off ButtonGETTING READY TO DRIVE Charging Port 8 for Off-Board ChargerENGAGED / DISENGAGED MODE COMPONENTS FOR WIZZ 888WNL DISASSEMBLY & ASSEMBLY INSTRUCTIONSCOMPONENTS FOR STREAMER 888WB/WAB/WSB COMPONENTS FOR JETSTREAM -L/M 888WAL/WAMTo reassemble the Powerchair, reverse the procedures described above DISASSEMBLY PROCEDURESBATTERIES BATTERIES & BATTERY CHARGINGWARNING! Only use the original manufacturer approved charger 1. Grasp the charging port cover and remove it from the charging port ~23~ ~24~ TROUBLE SHOOTING~25~ ~26~ SPECIFICATION~27~ QUARTERLY INSPECTIONDISCLAIMER