V . C O M F O R T A D J U S T M E N T S
BOLT, SPACERS, AND NUT
SETSCREW
Figure 10. Footrest Height | Figure 11. Footrest Angle |
Footrest Angle
Youcanadjusttheangleofthefootrestwithahexkey.Seefigure11.
To adjust the footrest angle:
1.Turnthesetscrewclockwisetoraisethefrontofthefootrest.
2.Turnthesetscrewcounterclockwisetolowerthefrontofthefootrest.
Controller Position
The controller can easily slide out away from the armrest, or in toward the armrest.You can also move the controller to the other armrest.
To extend the controller:
1.Use a hex key to loosen the setscrew. See figure 12.
2.Slide the controller into or out of the armrest to the desired position.
3.Tighten the setscrew.
To change the controller position:
1.Unplug the controller connector from the electronics tray. See figure 4.
2.Cut the wire tie that attaches the controller cable to the armrest.
3.Use a hex key to loosen the setscrew under the armrest. See figure 12.
4.Slide the controller out of the armrest.
5.Loosen the setscrew under the other armrest.
6.Place the controller in the other armrest.
7.Tighten the setscrew.
8.Use a wire tie to secure the controller cable to the armrest.
9.Plug the controller connector into the electronics tray.
SETSCREW
Figure 12. Underside of Armrest
22 | www.pridemobility.com | Quantum Jazzy 1400 Series Rev D May 04 |