V . C O M F O R T A D J U S T M E N T S
NOTE: Be sure you are on a flat level surface before activating the power elevating seat.
Power Elevating Seat Operation
Youcancontrolthepowerseatthrougheitherthetoggleswitchlocatedonthearmrestorthroughyourcontroller.Forinformationonhow toraiseandloweryourpowerseatthroughyourcontroller,seeVII.“Operation.”
To operate the power elevating seat:
1.Push the toggle switch forward to raise the seat. See figure 19.When you release the toggle, the seat will stop. Once the seat reaches its highest extension, the lift action stops; you should continue to hear and/or feel the lift motor running. This is because there is a clutch mechanism that allows the motor to continue running after the lift has reached its limit.This clutch works at both the top and bottom extensions of the lift.
CAUTION! Do not allow the motor to run more than a few seconds after the mechanism reaches the top or bottom limit.
2.Pullthetoggleswitchrearwardtoreturntheseattoitslowestposition.Whenreturningtothelowestposition,alwaysbesurethatthe mechanismhasreacheditslowestlimit.
To use the swivel feature:
1.Locate the swivel lever under the seat. It is located on the opposite side of the controller.
2.Push down on the lever to rotate the seat in 90° increments.
Figure 19. Toggle Switch
26 | www.pridemobility.com | Quantum Jazzy 1400 Series Rev D May 04 |