V I I . A S S E M B L Y
Versa Seat or Versa Tilt Option
IfyourJazzyisequippedwithaVersaSeatorVersaTilt,pleaserefer totheinstructionmanualsuppliedwiththeVersaSeat/VersaTilt.
WARNING! The Versa Tilt Seating System used on the Jazzy 1113 has an
Figure 23. Seat Installation
To mount the footrest:
1.Match the two tabs at the back of the footrest mounting bracket with the two semicircular notches in the vertical bar of the front frame.
2.Push the tabs through the matching notches.
3.Slide the footrest down into place. See figure 25.
To connect the controller:
1.Attach controller to the seat arm. See VI. “Comfort Adjustments.”
2.Plug the controller harness connector into the electronics tray on the rear battery tray weldment as shown in figure 26.
3.Do not place the controller cable so that it can be pinched in the seat frame or the chair frame.
CAUTION! Do not place the controller cable so that it can be pinched in the seat frame or the power base frame.
Figure 24. Locking the Seat Frame
Figure 25. Mounting the Footrest
CONTROLLER
HARNESS
CONNECTOR
Figure 26. Connecting the Controller Harness
30 | www.pridemobility.com | US Jazzy 1113/Rev I/Feb03 |