Pride Mobility Quantum 500 Actuator Keys and Actuator Lights For Optional Equipment, Horn Key

Page 33

V I I . O P E R A T I O N

Actuator Keys and Actuator Lights (For Optional Equipment)

Actuator keys and actuator lights are used for optional equipment such as power elevating leg rests. For specific operation of the actuator keys and actuator lights, contact your Quantum Rehab Specialist.

Horn Key

The horn key activates the horn.

Locking/Unlocking the VSI

The VSI has a feature that enables you to lock your power chair to prevent unauthorized use.

To lock the VSI:

1.With the VSI switched on, press and hold the on/off key. After 1 second, the VSI should beep.

2.Release the on/off key.

3.Push the joystick to the full forward position until the VSI beeps.

4.Pull the joystick to the full rearward position until the VSI beeps.

5.Release the joystick. There should be a long beep.

6.The VSI is now locked.

To unlock the VSI:

1.Press the on/off key and power on the VSI. The maximum speed/profile indicator should ripple up and down.

2.Push the joystick to the full forward position until the VSI beeps.

3.Pull the joystick to the full rearward position until the VSI beeps.

4.Release the joystick. There should be a long beep.

5.The VSI is now unlocked.

NOTE: If the above procedure fails to either lock or unlock the VSI, contact your Quantum Rehab Specialist.

Off-board Charger/Programming Socket

The off-board charger/programming socket is located on the front of the VSI. If you use an off-board charger, the charger current should not exceed 12 amps. Contact your Quantum Rehab Specialist for more information.

WARNING! Only chargers with Neutrik NC3MX plugs should be connected to the off-board charger/ programming socket. See your Quantum Rehab Specialist for more information.

NOTE: The socket may also be used for reprogramming the VSI. Contact your Quantum Rehab Specialist for more information.

Motor Connectors

This connects the VSI to the power chair’s motors and motor brakes.

Controller Connector

This connects the VSI to the power chair’s batteries, motors, and motor brakes.

Battery Connector

This connects the VSI to the power chair’s batteries.

Power Seat Actuator Connector

This connects the VSI to the power seat actuator.

Quantum 500

www.quantumrehab.com

33

Image 33

Contents Page F E T Y G U I D E L I N E S N T E N T S N T R O D U C T I O N PURCHASER’S AgreementInformation Exchange My Quantum Rehab Specialist Pride Owners ClubS a F E T Y Product Safety SymbolsS a F E T Y Modifications Pre-Ride Safety CheckWeight Limitations Tire InflationIncline Information Braking Information Cornering InformationPublic Streets and Roadways Outdoor Driving Surfaces Freewheel ModeStationary Obstacles Steps, Curbs, etc Stairs and EscalatorsDoors TransfersElevators Lift/Elevation ProductsMotor Vehicle Transport Inclement Weather PrecautionsPositioning Belts Reaching and BendingElectromagnetic and Radio Frequency Interference EMI/RFI AlcoholQuantum I . Y O U R P O W E R C H a I RQuantum 500 Specifications Electrical Components Quantum 500 Power BaseQuantum 500 Electrical Components To engage or disengage the drive motors Manual Freewheel LeversA S S E M B L Y Initial AssemblySeat Installation To install the seatController Installation Seat Height and Seat Angle Adjustment O M F O R T a D J U S T M E N T STo change the seat height To adjust the seatback angle Seatback Angle AdjustmentTo adjust the recline angle Seat PositionArmrest Angle Adjustment To change the armrest angle Armrest Width AdjustmentFoot Platform Depth To adjust the foot platform depth To change the armrest widthTo clamp the quick release fastener To adjust the foot platform angleFoot Platform Angle Controller PositionTo adjust the ELR angle To adjust the SFR lengthTo adjust the ELR length To adjust the forward/back positionMulti-Axis Foot Plate To adjust the leg rest lengthTo change leg rest length a To change foot plate position BBattery Break-in Tochargethebatteriesusingtheoff-boardchargerB a T T E R I E S a N D C H a R G I N G Batteries and ChargingCan I use a different battery charger? Frequently Asked Questions FAQs Howdoesthechargerwork?How often must I charge the batteries? Daily UseHow can I ensure maximum battery life? Why do my new batteries seem weak?How should I store my power chair and its batteries? What about public transportation?VSI Electronic Controller I . O P E R a T I O NVSI consists JoystickKeypad Battery Condition MeterOn/Off Key Red, yellow, and green lights lit Batteries chargedController Connector Motor ConnectorsBattery Connector Power Seat Actuator ConnectorThermal Rollback VSI Error CodesShould your power chair come in contact with water Care and MaintenanceTemperature I I . C a R E a N D M a I N T E N a N C EWeekly Checks Daily ChecksTo check the brakes Monthly ChecksCleaning Instructions Tire/Wheel Replacement Yearly ChecksStorage To replace the batteries Battery ReplacementBattery Installation Corrective Maintenance When to See Your Quantum Rehab Specialist for ServiceW a R R a N T Y Warranty Exclusions Reconditioned Units WarrantyService Checks and Warranty Service Exclusions also include components with damage caused byInspector Quality Control Quantum