Pride Mobility Quantum 500 manual Seat Position, To change the position, Seatback Angle Adjustment

Page 23

V . C O M F O R T A D J U S T M E N T S

11.Remove each screw from the trapeze bars and apply thread lock.

12.Reinstall each screw into the trapeze bars and tighten.

13.Reinstall the seat.

14.Reconnect the controller to the power base.

15.Reinstall the rear shroud.

Seat Position

You can move the seat forward or rearward by changing the extrusion mounting position.

To change the position:

1.Turn off the power to the controller.

2.Turntherearshroudfasteners counterclockwise one-quar ter turn and remove the rear shroud cover. See figure 6.

3.Unplug the controller connector(s) from the power base.

4.Remove the seat from the power base.

5.Remove both extrusions from the bottom of the seat.

6.Reposition the extrusions on a different set of mounting holes.You must move both extrusions the same number of holes either forward or backwards. See figure 13.

7.Fasten the extrusions back onto the bottom of the seat.

8.Reinstall the seat.

9.Reconnect the controller.

10.Reinstall the rear shroud.

Seatback Angle Adjustment

If your power chair is equipped with an adjustable seatback, you can adjust it to four (4) different angles: 90°, 102°, 105°, or 107°.

To adjust the seatback angle:

1.Remove the adjusting screws from each seat hinge. See figure 14.

2.Set the seatback at the desired angle.

3.Reinstalltheadjustingscrewstoeachseathingeandtighten.

Reclining Seat

If your power chair is equipped with a reclining seat, you can adjust the seatback angle with the seatback release le- ver. The lever is located on the right side of the seat base.

To adjust the recline angle:

1.Pull up on the seatback release lever.

2.Lean forward or backwards to the desired position.

3.Release the lever.

Figure 13. Seat Position Adjustment

ARMREST

ANGLE

ADJUSTING

SCREW

JAM NUTS

SEAT HINGE

SEATBACK

ANGLE

ADJUSTING

SCREW

ARMREST KNOB

Figure 14. Seatback Angle Adjustment

Quantum 500

www.quantumrehab.com

23

Image 23
Contents Page F E T Y G U I D E L I N E S N T E N T S Information Exchange N T R O D U C T I O NPURCHASER’S Agreement My Quantum Rehab Specialist Pride Owners ClubS a F E T Y Product Safety SymbolsS a F E T Y Modifications Pre-Ride Safety CheckIncline Information Weight LimitationsTire Inflation Public Streets and Roadways Braking InformationCornering Information Stairs and Escalators Freewheel ModeOutdoor Driving Surfaces Stationary Obstacles Steps, Curbs, etcLift/Elevation Products TransfersDoors ElevatorsReaching and Bending Inclement Weather PrecautionsMotor Vehicle Transport Positioning BeltsElectromagnetic and Radio Frequency Interference EMI/RFI AlcoholQuantum I . Y O U R P O W E R C H a I RQuantum 500 Specifications Electrical Components Quantum 500 Power BaseQuantum 500 Electrical Components To engage or disengage the drive motors Manual Freewheel LeversA S S E M B L Y Initial AssemblyController Installation Seat InstallationTo install the seat To change the seat height Seat Height and Seat Angle AdjustmentO M F O R T a D J U S T M E N T S Seat Position Seatback Angle AdjustmentTo adjust the seatback angle To adjust the recline angleTo change the armrest width Armrest Width AdjustmentArmrest Angle Adjustment To change the armrest angle Foot Platform Depth To adjust the foot platform depthController Position To adjust the foot platform angleTo clamp the quick release fastener Foot Platform AngleTo adjust the forward/back position To adjust the SFR lengthTo adjust the ELR angle To adjust the ELR lengthTo change foot plate position B To adjust the leg rest lengthMulti-Axis Foot Plate To change leg rest length aBatteries and Charging Tochargethebatteriesusingtheoff-boardchargerBattery Break-in B a T T E R I E S a N D C H a R G I N GDaily Use Frequently Asked Questions FAQs Howdoesthechargerwork?Can I use a different battery charger? How often must I charge the batteries?What about public transportation? Why do my new batteries seem weak?How can I ensure maximum battery life? How should I store my power chair and its batteries?Joystick I . O P E R a T I O NVSI Electronic Controller VSI consistsRed, yellow, and green lights lit Batteries charged Battery Condition MeterKeypad On/Off KeyPower Seat Actuator Connector Motor ConnectorsController Connector Battery ConnectorThermal Rollback VSI Error CodesI I . C a R E a N D M a I N T E N a N C E Care and MaintenanceShould your power chair come in contact with water TemperatureMonthly Checks Daily ChecksWeekly Checks To check the brakesStorage Cleaning Instructions Tire/Wheel ReplacementYearly Checks To replace the batteries Battery ReplacementBattery Installation Corrective Maintenance When to See Your Quantum Rehab Specialist for ServiceW a R R a N T Y Exclusions also include components with damage caused by Reconditioned Units WarrantyWarranty Exclusions Service Checks and Warranty ServiceInspector Quality Control Quantum