SECTION 11—TRANSPORT READY PACKAGE (TRRO)
WARNING
Transport ready packages are not retrofittable to existing models and are not field serviceable.
Only use the transport brackets included with TRRO and TRBKTS for the purposes described in this manual.
Battery retention brackets MUST be installed at all times. Otherwise, the wheelchair will not be WC/19 compliant. Refer to Removing/Installing the Batteries From/Into the Wheelchair on page 55.
About Transport Ready Packages
TRRO includes four factory‐installed transport brackets and a wheelchair anchored pelvic belt. TRRO has been crash‐tested in accordance with ANSI/RESNA WC Vol 1 Section 19 Frontal Impact Test requirements for wheelchairs with a 130 lb crash test dummy, which corresponds to a person with a weight of 125 to 165 lbs. for Junior seat sizes or a 168 lb crash dummy, which corresponds to a person with a weight of 165 to 300 lbs. for Adult seat sizes.
TRBKTS includes four factory‐installed wheelchair transport brackets. TRBKTS has not been crash‐tested in accordance with WC 19. Use these transport brackets only to secure an unoccupied wheelchair during transport.
As of this date, the Department of Transportation has not approved any tie‐down systems for transportation of a user while in a wheelchair, in a moving vehicle of any type. It is Invacare’s position that users of wheelchairs should be transferred into appropriate seating in vehicles for transportation and use be made of the restraints made available by the auto industry. Invacare cannot and does not recommend any wheelchair transportation systems.
Compliance Information
This wheelchair conforms with the requirements of the ANSI/RESNA WC/Vol. 1 ‐ Section 19.
NOTE: ANSI = American National Standards Institute, RESNA= Rehabilitation Engineering and Assistive Technology Society of North America.
This wheelchair has been dynamically tested in a forward‐facing mode with the specified crash test dummy, which corresponds to a person with a 130 lb crash test dummy, which corresponds to a person with a weight of 125 to 165 lbs for Junior seat sizes or a 168 lb crash dummy, which corresponds to a person with a weight of 165 to 300 lbs for Adult seat sizes, restrained by BOTH pelvic and upper‐torso belts in accordance with ANSI/ RESNA WC Vol 1 Section 19. BOTH pelvic and upper‐torso belts should be used to reduce the possibility of head and chest impacts with vehicle components.
Part No 1154294 | 63 | TDX® SI, TDX |