SECTION 8—SHROUD/WHEELS
SECTION 8—SHROUD/WHEELS
WARNING
After any adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service verify that On/Off switch on the joystick is in the Off position.
Replacing the Flat Free Tires on the Wheel Rim
WARNING
DO NOT attempt to replace flat free tires. This procedure MUST be performed by a qualified technician.
NOTE: During initial use of the wheelchair, the user may experience flat spots on the wheels. Flat spots will vanish with continued use of the wheelchair.
Removing/Installing the Shrouds
NOTE: For this procedure, refer to FIGURE 8.1 on page 53.
Removing
1.Perform one of the following:
•Wheelchairs with Formula PTO Plus ‐ Tilt the seat back. Refer to Tilting the Seat Assembly on page 47.
•Wheelchairs without Formula PTO Plus ‐ Remove the seat assembly. Refer to Removing/Installing the Seat Assembly on page 46.
2.Perform one of the following:
•Top Shroud ‐ Lift up on rear edge of top shroud to release the four hook and loop strips that secure the top shroud to the base frame (Detail “A”).
•Front Shroud ‐ Turn release knob ¼‐turn to the unlocked position and lift up to remove front shroud from base frame hooks (Detail “B”).
Pronto® M91™Base with SureStep® | 52 | Part No 1143153 |