SECTION 9—BATTERIES
Required Items: |
|
|
|
|
|
TOOL | QUANTITY | COMMENTS |
Battery Charger | 1 | Supplied |
|
|
|
Extension Cord | 1 | Not Supplied |
|
|
|
1.Attach the battery charger connector to the charger port on the joystick.
2.Plug the charger’s AC power cord, or extension, into the grounded 120 VAC wall outlet.
3.Wait until charging is complete.
NOTE: Allow eight hours for normal charging. Larger batteries (greater than 55 ampere‐hours) or severely discharged batteries may require up to sixteen hours to be properly charged and equalized.
NOTE: It is advantageous to recharge frequently rather than only when necessary. In fact, a battery’s life is extended if the charge level is maintained well above a low condition.
NOTE: If the batteries need to be charged more often or take longer to charge than normal, they may need to be replaced. Contact an Invacare dealer for service.
SPJ Joysticks
Charger/
Programming
Port
MPJ Joystick
Charger/Programming Port (On
Front of Joystick)
FIGURE 9.7 Charging Batteries
Pronto® M91™Base with SureStep® | 66 | Part No 1143153 |