Invacare 220 Adjusting Seat Height Deluxe Seat Only, Adjusting 90 Seat Swivel Deluxe Seat Only

Page 32

SECTION 7—SEAT AND ARMS

Adjusting Seat Height - Deluxe Seat Only

NOTE: For this procedure, refer to FIGURE 7.4.

1.Remove the seat. Refer to Removing/Installing the Deluxe Seat on page 31.

2.Remove the quick-release pin that secures the seat post to the frame tube.

3.Align the frame tube mounting hole with one (1) of three (3) seat post mounting holes to achieve desired seat height.

4.Insert the quick-release pin through both the frame tube and the seat post.

NOTE: Ensure that the detent ball is visible outside the frame tube.

5.Install the seat. Refer to Removing/Installing the Deluxe Seat on page 31.

Seat Post

Quick-Release

NOTE: Tiller not shown for clarity.

Mounting Holes

Frame Tube

FIGURE 7.4 - Adjusting Seat Height - Deluxe Seat Only

Adjusting 90° Seat Swivel - Deluxe Seat Only

WARNING

Ensure that seat is locked into the forward position BEFORE and DURING operation of the scooter. Otherwise, injury to the user and/or damage to the scooter may result.

CAUTION

DO NOT use the seat swivel option when accessories are installed (such as safety flag, crutch/cane holder, etc.) and the seat is mounted in lowest height adjustment position. Otherwise, damage to the scooter may occur.

220

32

Part No. 1125053

Image 32

Contents HMVHighly Maneuverable Vehicle 220 Table of Contents Tiller Adjustment Transporting Register Your Product Product Registration Form Fold here Cut Along Line Special Notes TIE-DOWN Restraints and Seat RestraintsTypical Product Parameters 220Label Locations Operation Information Repair or Service InformationGeneral Guidelines General Guidelines Electrical Grounding InstructionsWeight Training Weight LimitationBatteries Rain TestEMI Information EMI Information Stability and Balance SAFETY/HANDLING of Powered ScootersPercentage of Weight Distribution Stairways EscalatorsInspect/Adjust Initially Safety InspectionSafety Inspection Checklists Inspect/Adjust Weekly Inspect/Adjust MonthlyInspect/Adjust Periodically Maintenance and Troubleshooting Suggested Maintenance ProceduresTroubleshooting Symptom Probable Cause SolutionOperation of the Powered Scooter Control PanelOperating the Scooter Engaging/Disengaging the Brake Release Lever Resetting the Circuit Breaker Engaging/Disengaging the Brake Release LeverRemoving/Installing/Adjusting the Padded Seat Installing/Adjusting Seat HeightSeat and Arms RemovingUnfolding Folding/Unfolding the Back Padded Seat OnlyFolding Removing/Installing the Deluxe Seat InstallingAdjusting Seat Height Deluxe Seat Only Adjusting 90 Seat Swivel Deluxe Seat OnlyRemoving/Installing the Arms Deluxe Seat Only Adjusting 90 Seat Swivel Deluxe Seat OnlyRemoving/Installing the Arms Deluxe Seat Only Replacing Armrest Pads Deluxe Seat OnlyTiller Adjustment Adjusting the Tiller AngleRemoving/Installing the Drive Wheels Wheels and CastersRemoving/Installing the Front Wheel Removing/Installing the Drive WheelsRemoving/Installing the Fork Removing/Installing the ForkRemoving/Installing the Caster Assemblies Removing/Installing the Caster AssembliesRecommended Battery Type BatteriesRemoving/Installing the Battery Box Recommended Battery TypeRemoving/Installing the Batteries Inhibit RED Battery Charger Circuit Connector Charging the BatteriesCharging the Batteries Transporting Transporting the ScooterDisassembling AssemblingTransporting the Scooter Scooter Accessories Installing/Removing the Crutch/Cane HolderInstalling/Removing the Safety Flag Installing/Removing the Crutch/Cane HolderUsing the Walker Holder Installing/Removing/Using the Walker HolderInstalling/Removing the Walker Holder Installing/Removing the Rear Mounted Basket Installing/Removing the Rear Mounted BasketLimited Warranty Product Made Taiwan