Invacare 220 manual Removing/Installing the Caster Assemblies

SECTION 9—WHEELS AND CASTERS

Removing/Installing the Caster Assemblies

NOTE: For this procedure, refer to FIGURE 9.4.

Removing

1.Remove the dust cap (not shown).

2.Using a wrench, turn the hex nut on the caster assembly counter-clockwise to loosen it.

3.Remove the caster wheel.

4.Repeat STEPS 1-2 to remove the other caster.

Installing

1.Insert the new caster wheel into the caster housing.

2.Turn the hex nut clockwise to securely tighten the caster wheel in place.

3.Reinstall the dust cap (not shown).

4.Repeat STEPS 1-3 to remove the other caster.

Swingarm Assembly

Location of

Dust Cap

Hex Nut Caster Housing

Caster

NOTE: Dust caps on caster assemblies not shown.

FIGURE 9.4 Removing/Installing the Caster Assemblies

Part No. 1125053 39 220