Invacare 220 manual Removing/Installing the Arms Deluxe Seat Only

SECTION 7—SEAT AND ARMS

NOTE: For this procedure, refer to FIGURE 7.5.

1. Slightly pull up on the seat lock lever.

NOTE: The seat locks in position at 90° intervals. The seat is locked when an audible “click” is heard.

2.Rotate the seat to the desired position.

3.Release the seat lock lever to lock the seat in the desired position.

NOTE: Ensure that the seat is locked in position before operating the scooter.

Top View View From Back

Seat Seat

Seat

Lock

FIGURE 7.5 - Adjusting 90° Seat Swivel - Deluxe Seat Only

Removing/Installing the Arms - Deluxe Seat Only

NOTE: For this procedure, refer to FIGURE 7.6.

Removing

1.Remove the two (2) mounting screws that secure the arm to the seat hinge.

2.Remove the arm.

3.If necessary, repeat steps 1-2 for the other arm.

Installing

NOTE: When installing the arms during set up, the four (4) mounting screws are installed on the seat hinge for shipping purposes.

1.Install the arm on to the seat hinge and secure with the two (2) mounting screws.

2.Repeat STEPS 1-2 for the other arm.

Part No. 1125053 33 220