Invacare L-4, L-3 user manual Installing/Removing the Safety Flag

12 ACCESSORIES

12.3 Installing/Removing the Safety Flag

WARNING

￿ The installation of the safety flag onto the back of the scooter seat significantly increases the length of the scooter. When turning the scooter or swiveling the scooter seat, it is important to take note of this increased length - otherwise, injury and/or damage to the surrounding property may result.

For this procedure, refer to FIGURE 12.3.

Installing

1.Install the bracket into the accessory tube located on the back of the seat.

2.Install mounting knob to secure the bracket in place. Securely tighten.

3.Install safety flag into bracket.

Removing

1.Remove the safety flag from the bracket.

2.Remove the mounting knob that secures the bracket in place.

3.Remove the bracket from the accessory tube located on the back of the seat.

Mounting Knob

Accessory Tube

Safety Flag

Insert Into Accessory

Tube

Bracket

FIGURE 12.3 Installing/Removing the Safety Flag

Invacare® Lynx™ L-3& Invacare® Lynx™ L-4 Scooters 48 Part No. 1143205