Invacare L-4, L-3 user manual Adjusting Seat Height

7 SEAT AND ARMS

7.2Adjusting Seat Height

For this procedure, refer to FIGURE 7.2.

1.Remove the seat. Refer to Removing/Installing the Seat on page 29.

2.Remove the battery box. Refer to Removing/Installing the Battery Box on page 38.

3.Loosen the knob on the frame tube.

4.Remove the locking pin that secures the seat post to the frame tube.

5.Align the frame tube mounting hole with one of three seat post mounting holes to achieve desired seat height.

WARNING

￿ Make sure the detent balls of the locking pin are fully released beyond the outer edge of the frame tube before operating the scooter. Otherwise, injury and/or damage may result.

Keep detent balls clean.

6. Insert the locking pin through the frame tube and seat post. Ensure the detent balls (not shown) of the locking pin are beyond the outer edge of the frame tube and the pin secures the frame tube to the seat post.

7. Tighten the knob until the seat post does not move around inside of the frame tube.

8. Install the seat. Refer to Removing/Installing the Seat on page 29.

Invacare® Lynx™ L-3& Invacare® Lynx™ L-4 Scooters 30

Knob removed for clarity. The knob does not have to be removed to perform this procedure.

	Seat Post
Locking Pin	Mounting
	Holes
Knob
	Frame Tube
	Frame Tube
	Mounting Hole

FIGURE 7.2 Adjusting Seat Height

Part No. 1143205