11 TRANSPORTING
Assembling
1.Unfold tiller. Refer to Adjusting the Tiller Angle on page 26.
2.Tilt the rear frame back a little.
3.Hold the seat post and align the frame tubes on the front frame assembly with the mounting recesses on the rear frame assembly (Detail “B”).
4.While holding the seat post, slowly pivot the rear frame assembly forward until the release lever locks (Detail “A”).
5.Install the battery box. Refer to Refer to Removing/Installing the Battery Box on page 38.
6.Install the seat. Refer to Removing/Installing the Seat on page 23.
7.Install the basket.
DETAIL “A” | Release | DETAIL “B” | Front Frame |
|
| ||
| Lever |
| |
| Seat Post | Assembly | |
Seat Post |
| ||
|
|
| |
|
| Frame Tube | Frame Tube |
|
|
| |
|
| Mounting |
|
|
| Recess |
|
|
| Release | Mounting |
|
| Recess | |
|
| Lever | |
|
|
| |
|
| Rear Frame Assembly |
|
|
| (Slightly Tilted) |
|
FIGURE 11.1 Transporting the Scooter
Part No. 1143205 | 45 | Invacare® Lynx™ |