D-Link DWL-7100AP manual Home LAN, Get IP From

Using the Configuration Menu (continued)

Home > LAN

LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DWL-7100AP. These settings may be referred to as private settings.You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet.

Get IP From-	Select Static (Manual) or Dynamic (DHCP) as the method you will
	use to assign an IP address to the DWL-7100AP.
IP Address-	The IP address of the LAN interface. The default IP address
	is: 192.168.0.50 (Note: You will need to use the AP Manager to
	determine the IP address dynamically assigned to the access
	point.)
Subnet Mask-	The default subnet mask is 255.255.255.0
Default Gateway-	This field is optional. Enter in the lP address of the router on
	your network.
Apply-	Click Apply if you have made any changes.

13