Using the Configuration Menu (continued)
Advanced > Encryption (continued)
WPA mode-
Passphrase-
Cipher Type-
PSK - The
EAP - Extensible Authentication Protocol is a
general authentication protocol that is used in conjunction with a RADIUS server in the network.
If you selected PSK you will need to enter a Passphrase in this field.
If you selected EAP you will need to select a Cipher (EAP) Type: Auto, AES, or TKIP.
Group Key Update Interval-
RADIUS Server-
RADIUS Port-
RADIUS Secret-
Encryption-
Key Type-
Key Size-
Valid Key-
Key Table-
Apply-
If you selected PSK you will need to enter a figure in this field.
Enter the IP address of the RADIUS server.
Enter the port on your AP dedicated to the RADIUS server.
Enter the secret phrase.
Select Disabled or Enabled.
Select HEX or ASCII.
Select 64-, 128-, 152-bits.
Select the 1st through the 4th key to be the active key.
Input up to four keys for encryption. You will select one of these keys in the valid key field.
Click Apply to save changes.
21