D-Link DWL-7100AP manual Advanced Grouping, Load Balance Select Enabled or Disabled

Using the Configuration Menu (continued)

Advanced > Grouping

Load Balance: Select Enabled or Disabled.

When you Enable Load Balance you allow several DWL-7100APs to balance wireless network traffic and wireless clients among the DWL-7100APs in the network. Assign each access point a different non-overlapping channel (e.g., 1, 6, 11).

User Limit: Set the User Limit in this field (0-64).

Link Integrity: Select Enabled or Disabled.

When Link Integrity is Enabled, whenever the Ethernet connection between the LAN and the AP is disconnected - then the wireless segment associated with the AP will also be disconnected from the AP.

Ethernet Link Status: This field displays the Ethernet Link Status. Link Up indicates that there is an Ethernet LAN connection to the AP.

Apply: Click Apply if you have made any changes.

22