Using the AP Manager (continued)
Firmware
You can upgrade the firmware by clicking on this button after selecting the device(s).
To upgrade the firmware:
•Download the latest firmware upgrade from http://support.dlink.com to an easy to find location on your hard drive.
•Click on the firmware button as shown above.
•A popup window will appear. Locate the firmware upgrade file and click Open.
IMPORTANT! DO NOT DISCONNECT POWER FROM THE UNIT WHILE THE FIRMWARE IS BEING UPGRADED.
System Settings
You can customize the basic System Settings for the
•Access Password: This sets the admin password for the selected device(s).
•Auto Refresh: This setting allows you to enable auto refreshing of the network device list. By default this option is disabled. If you choose to enable it, you must enter the refresh interval in seconds.
All other settings on this screen should be left at the default setting.
45