Using the AP Manager (continued)
Configuration Files
The
•Select a device from the Device List on the main screen of the AP Manager.
•Click the device configuration button.
•Click the Save button after you have all of the settings as you want them.
•A popup window will appear prompting you for a file name and location. Enter the file name, choose a file destination, and click Save.
Device Configuration button.
To load a previously saved configuration file, follow these steps:
•Select a device or devices from the Device List on the main screen of the AP Manager.
•Click the device configuration button.
•Click the Open button.
•A popup window will appear prompting you to locate the configuration file. Locate the file and click Open.
•The configuration file is loaded into the AP Manager but has not actually been written to the device(s). If you want to use the newly loaded configuration for the selected device(s), click Apply and the configuration settings will be written to the device(s).
Device Configuration button.
You must always click Apply in the Configuration window if you want the settings to take effect.
44