D-Link DWL-7100AP manual Device ConfigurationDHCP

Page 43

Using the AP Manager (continued)

Device Configuration>DHCP

DHCP Server: Enable or disable the DHCP server function.

Dynamic Pool Settings: Click to enable Dynamic Pool Settings. Configure the IP address pool in the fields below.

Static Pool Settings: Click to enable Static Pool Settings. Use this function to assign the same IP address to a device at every restart. The IP addresses assigned in the Static Pool list must NOT be in the same IP range as the Dynamic Pool.

IP Assigned From: Enter the initial IP address to be assigned by the DHCP server.

Range of Pool (1~255): Enter the number of allocated IP addresses.

SubMask: Enter the subnet mask.

Gateway: Enter the gateway IP address, typically a router.

Wins: Wins (Windows Internet Naming Service) is a system that determines the IP address of a network computer with a dynamically assigned IP address, if applicable.

DNS: The IP address of the DNS server, if applicable.

Domain Name: Enter the domain name of the DWL-7100AP, if applicable.

Lease Time: The period of time that the client will retain the assigned IP address.

Status: This option turns the dynamic pool settings on or off.

43

Image 43
Contents Link AirPremier AG Contents Package Contents Introduction LEDs FeaturesWireless Basics Standards-Based Technology Wireless BasicsInstallation Considerations IP Address Getting StartedGetting Started Home Wizard Using the Configuration MenuChannel Home WirelessApply Get IP From Home LANWlans Advanced ModeAdvanced Mode AP Repeater & AP Client Frequency The frequency will reflect the channel selection Advanced PerformanceUsing the Configuration Menu Network Advanced Filters Wireless Access SettingsEthernet to Wlan Access Wireless BandAdvanced Filters Wlan Partition Advanced Encryption Advanced Encryption WPA mode Passphrase Cipher TypeAdvanced Grouping Load Balance Select Enabled or DisabledAdvanced Dhcp Server Dynamic Pool Settings SubMask Advanced Dhcp Server Static Pool SettingsStatic Pool Settings Assigned IP Assigned MAC AddressBinding MAC address Assigned IP address Advanced Dhcp Server Current IP Mapping ListBinding MAC address Tools System Tools AdminTools Firmware Tools Cfg File Update FileLoad Settings to Local Hard Drive TimeoutStatus Stats Status Device InfoHelp Status Client InfoDiscovering Devices Using the AP ManagerIP Configuration Selecting DevicesDevice Configuration Device ConfigurationGeneral Using the AP Manager Device ConfigurationWirelessIEEE802.11a Device ConfigurationWireless Device ConfigurationSecurityIEEE802.11a & IEEE802.11g Device ConfigurationSecurityIEEE 802.11gWPA-EAP Device ConfigurationSecurityIEEE 802.11aWPA-EAPDevice ConfigurationSecurityWPA-PSK Device ConfigurationFilters Device ConfigurationAP Mode Device ConfigurationDHCP Configuration Files Firmware System SettingsSetup Wizard Setup Wizard IEEE802.11g Setup Wizard IEEE802.11a Click Finish DWL-7100AP setup is complete About RefreshNetworking Basics Using the Network Setup Wizard in Windows XPNetworking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Please wait while the Network Setup Wizard copies the files Setup Wizard  Right-click on My Computer  Select Properties Naming your ComputerChecking the IP Address in Windows XP Assigning a Static IP Address in Windows XP/2000  Double-click on Network Connections Assigning a Static IP Address Windows XP/2000 Networking BasicsChecking the Wireless Connection by Pinging in Windows XP Troubleshooting Troubleshooting  Go to Start  Right-click on Link DWL-A650 Why can’t I get a wireless connection? Why does my wireless connection keep dropping?Resetting the DWL-7100AP to Factory Default Settings Technical Specifications Technical Specifications Tech Support for customers within Canada Tech Support for customers within the United StatesWarranty Page Important Note Registration