D-Link DWL-7100AP manual Device ConfigurationSecurityIEEE802.11a & IEEE802.11g

Using the AP Manager (continued)

Device Configuration>Security>IEEE802.11a & IEEE802.11g

The Security tab contains the WEP configuration settings on the intial page. If you select WPA as the authentication type, an additional tab will appear with the WPA configuration options based on your selection.

•Authentication Type: Select from the pulldown menu the type of authentication to be used on the selected device(s).

•Encryption: Enable or disable encryption on the selected device(s).

•Active Key Index: Select which defined key is active on the selected device(s).

•Key Values: Select the key size (64-bit, 128-bit, or 152-bit) and key type (HEX or ASCII) and then enter a string to use as the key. The key length is automatically adjusted based on the settings you choose.

38