D-Link DWL-7100AP manual Features, LEDs

Features

Faster Wireless Networking with speeds up to 108Mbps* in Super AG mode

Compatible with 802.11a, 802.11b and 802.11g Devices - Fully compatible with the IEEE 802.11a, 802.11b and 802.11g standards, the DWL-7100AP can connect with existing 802.11b-, 802.11g- or 802.11a- compliant wireless network adapter cards.

Better security with WPA- The DWL-7100AP can securely connect to wireless clients on the network using WPA (Wi-Fi Protected Access) providing a much higher level of security for your data and communications than has previously been available.

LEDs

LED stands for Light-Emitting Diode. The DWL-7100AP Wireless Access Point has 5 Green LEDs as shown below:

LED	LED Activity
	A steady light indicates a connection to a power
Power
	source
LAN (10/100)	A steady light indicates a connection to the Ethernet
	port; a blinking light indicates activity
WLAN	A blinking light indicates activity in the respective
(802.11a and
	wireless mode: 802.11a and/or 802.11b/802.11g
802.11b or
802.11g)

*“Maximum wireless signal rate derived from IEEE Standard 802.11a and 80211g specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate.”

5