Take Inventory, Wire Recommendations, Rtsfx

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves,or other apparatus (including amplifiers) that produce heat.

9.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

10.WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.

Product Disposal—Certain international, national and/or local laws and/or regulations may apply regarding the disposal of this product. For further detailed information, please contact the retailer where you purchased this product or the Polk Audio Importer/Distributor in your country. A listing of Polk Audio Importer/Distributors can be found on the Polk Audio website www.polkaudio.com or

by contacting Polk Audio at 5601 Metro Drive, Baltimore, Maryland 21215, USA—

Phone: +1 410 358-3600.

WARNING: LISTEN CAREFULLY

Polk Audio loudspeakers and subwoofers are capable of playing at extremely high volume levels, which could cause serious or permanent hearing damage. Polk Audio, Inc. accepts no liability for hearing loss, bodily injury or property damage resulting from the misuse of its products.

Keep these guidelines in mind and always use your own good judgment when controlling volume:

•You should limit prolonged exposure to volumes that exceed 85 decibels(dB).

For more about safe volume levels, go to www.polkaudio.com/ education/article/SPL/, or refer to the Occupational Health and Safety Administration (OSHA) guidelines at http://www.osha.gov/dts/osta/otm/noise/standards_more.html

TAKE INVENTORY

Inside each speaker container, you should find the following:

1.One RTSC or one set of RTSFX speakers

2.Speaker mounting template (RTSFX only)

3.Paint mask

4.One perforated aluminum grille (for each speaker)

5.One cloth grille (for each speaker)

6.One RTSC/RTSFX Manual

7.Registration Card

8.STL105 Stud-Lock Bracket (RTSFX only)

9.Enclosure (RTSC only)

Important Note: If anything is missing or damaged, or if your speaker fails to operate, notify Polk Audio Customer Support Services immediately at 800-377-7655.

INSTALLATION RECOMMENDATION FOR OPTIMUM PERFORMANCE

Important Note: RTS Series Loudspeakers are not magnetically shielded and should not be placed closer than 1' (30cm) from a direct-view television or video monitor.

Important Note: You should have a thorough under- standing of and adhere to all local building and fire codes. Also, you should be familiar with the area behind the wall or ceiling into which you plan to install your speakers. Always use wire that meets appropriate building and fire codes. Use at least

14 gauge wire or heavier for the best sound quality. (Note: Wiring is best performed by an experienced professional.)

When installing your RTS Series In wall Loudspeakers, be aware of the weight of your particular model (see specification page for the weight of your model) and the sturdiness of the material into which you are installing the speaker. Be aware of any concealed studs, electrical wiring or plumbing in the wall or ceil- ing into which you are installing the speakers.

If you doubt that you possess the necessary skills or tools, consult your Polk Audio dealer or a professional installer.

WIRE RECOMMENDATIONS

Runs	Gauge
Lengths up to 25'	18 or 16
Lengths greater than 25'	16 or 14
but less than 50'
Lengths greater than 50'	14 or 12
but less than 75'
Lengths greater than 75'	12

LOUDSPEAKER INSTALLATION

You will need:

•Pencil for marking the location of installation.

•Keyhole saw, utility knife or material-appropriate tool for cutting drywall or other wall material.

•Level.

•Screwdriver, preferably powered, with Phillips Head bit.

•Power drill with appropriate bit (optional, for starting wall cut).

Stud-Lock Mounting System™ (RTSFX only)

Installation

See the instructions included with each Stud-Lock Mounting System™.

Important Note: For new construction: If you are using a pre-construction bracket, always install it first before installing the Stud-Lock Mounting System™.

If you are installing a pre-construction bracket (PB105) and a Stud-Lock Mounting System (STL105) together, be aware that the speaker’s enclosure can catch on the edge of the pre-construction bracket. Push the bottom of the loudspeaker enclosure up and over the protruding edge of the pre-construction bracket.

This will fully seat the loudspeaker in the wall.

RTSFX

Trace around the template.

Cut the hole with the appropriate tool.

2Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM EST, polkcs@polkaudio.com

RTSFX, RTSC specifications

Polk Audio has established itself as a leader in performance-driven audio solutions, and their RTSC and RTSFX speakers exemplify this commitment to quality and innovation. Tailored for both home theater enthusiasts and music lovers, these speakers offer a blend of advanced technologies and thoughtful design that elevate the listening experience.

The Polk Audio RTSC, a center channel speaker, is engineered to deliver clear dialogue and precise sound reproduction. One of its standout features is the Dynamic Balance technology, which helps minimize distortion and ensures a natural sound. This technology involves a unique resonance-damping enclosure that allows the speaker to handle high output levels without compromising audio clarity. The tweeter is designed for extended high-frequency response, which enhances the realism of on-screen dialogue and sound effects. The RTSC is equipped with dual 5.25-inch bi-laminate composite woofers, providing a robust midrange performance that accurately reproduces vocal nuances and detailed soundscapes.

On the other hand, the Polk RTSFX is a pioneering surround speaker that supports a true immersive listening experience. It features a unique design that allows for both wall-mount and bookshelf placement, making it versatile for various room configurations. The RTSFX utilizes a 5.25-inch full-range driver alongside a specially designed 1-inch silk dome tweeter that produces a broad soundstage, ideal for enveloping listeners in movies and music. Its bipolar configuration enhances the surround experience by creating a more spacious soundfield, making you feel as though you are right in the middle of the action.

Both the RTSC and RTSFX speakers incorporate Polk's patented PowerPort technology, which optimizes the low-frequency response. By smoothly transitioning bass sounds into the room, it ensures a more profound and natural bass performance without compromising clarity. Additionally, both models feature a sleek and modern design, finished in a stylish black or walnut veneer that can seamlessly blend with any home decor.

In conclusion, the Polk Audio RTSC and RTSFX speakers are quintessential choices for those seeking exceptional home audio performance. With their advanced technologies, thoughtful features, and elegant design, they promise to enhance any audio setup, whether in a multi-channel home theater or a simple stereo arrangement. Their commitment to delivering authentic sound quality ensures an enriching experience for every listening session.