SECTION
Checking Charge Level of Internal Battery
NOTE: For this procedure, refer to FIGURE 6.2.
NOTE: Perform this procedure after charging the batteries and prior to using the XPO2 for the first time and prior to any subsequent use to ensure the internal battery is fully charged.
1.Turn On the XPO2 by pressing and holding the On/Off button.
2.Press and hold the battery status button located on the keypad.
NOTE: Pressing the battery status button will illuminate the battery gauge and indicate the charge level of the internal battery. When the battery is fully charged all four battery gauge indicator lights will illuminate and stay illuminated until the button is released. Lesser charges will illuminate fewer gauge indicator lights.
Battery Gauge | Battery Status |
| Button |
FIGURE 6.2 Checking Charge Level of Internal Battery
Part No 1148112 | 21 | Invacare XPO2™ |