ResMed 618362 manual Cleaning the Mask between Patients, Reassembling the Mask, Elbow Reassembly

Page 9

Cleaning the Mask between Patients

The Mirage Quattro should be disinfected or sterilised when used between patients. All components, except the headgear, are validated for up to 20 disinfection or sterilisation cycles using one of the following processes:

•Thermal disinfection at a maximum temperature–time combination of 93°C for 10 minutes

•Chemical disinfection (eg, Cidex™ OPA or Cidex Plus™)

•The STERRAD™ Sterilization System (eg, 100S or NX).

The headgear should be thoroughly washed between patients, as described in “Cleaning the Mask in the Home”.

Detailed disinfection and sterilisation instructions are available from the ResMed website, www.resmed.com/masks/sterilization, and must be consulted before multipatient use.

Reassembling the Mask

See section D on the illustrations sheet.

Before reassembling the mask, check that all components are clean and dry. Check that the valve is not damaged, distorted or torn, and that none of the other components are broken or cracked. Replace any parts that are damaged. Flexible PVC contains elements that can be detrimental to the materials of the mask. If flexible PVC tubing is used continuously, the attachment port should be inspected for cracking. Replace any parts that are damaged.

Elbow Reassembly

1Insert the valve into the valve clip (Fig. D-1).

2Push the valve clip onto the elbow (Fig. D-2). Make sure both sides click into place (Fig. D-3).

3Insert the swivel into the end of the elbow (Fig. D-4).

4Insert the assembled elbow (Fig. D-5) into the mask frame.

Mask Reassembly

1Fit the cushion clip into the grooved edge of the mask cushion. Fit the top section first, then work your way around, pushing the clip into the cushion (Fig. D-6). Ensure that the cushion is not twisted or distorted around the clip.

2Align the cushion clip with the mask frame. Push the cushion clip into the mask frame, ensuring that all three clips click into place (Fig. D-7).

3Push the forehead pads firmly into the forehead support (Fig. D-8).

English

5

Page 8 Page 10
Image 9
Page 8 Page 10
Contents User Guide Mirage QuattroPage ResMed 2007Component of 61836/2 Mirage QuattroIntended Use Before Using the MaskFitting the Mask Using the MaskRemoving the Mask Disassembling the MaskOptimising Mask Seal and Comfort Cleaning the Mask in the Home Daily/After Each UseWeekly Elbow Reassembly Cleaning the Mask between PatientsMask Reassembly Reassembling the MaskProblem Possible reason Possible solution TroubleshootingStorage DisposalTechnical Specifications Mask sizes SymbolsOrdering Information Ref. Item Consumer WarrantyVerwendungszweck VorabhinweiseWarnhinweise Anlegen der Maske Verwendung der MaskeOptimaler Maskensitz und Komfort Auseinandernehmen der Maske Abnehmen der MaskeTäglich/Nach jedem Gebrauch Reinigung der Maske zu HauseWöchentlich WarnungWiederzusammenbau der Maske Wiederzusammenbau des KniestücksWiederzusammenbau der Maske Aufbewahrung Problem Möglicher Grund Mögliche LösungEntsorgung FehlersucheDruck-Fluss-Kurve Technische DatenInformationen zum Totraum Druck DurchflussNormen SignalBehandlungsdruck WiderstandSymbole BestellinformationenArtikelnr. Artikel Artikelnr VerbrauchergewährleistungPage Usage prévu Avant d’utiliser le masqueAvertissements Mise en place du masque Utilisation du masqueLe masque mis en place est représenté à la Fig. B-8 Optimisation de létanchéité et du confort du masqueRetrait du masque Démontage du masqueNettoyage du masque à domicile Quotidien/Après chaque utilisation Nettoyage du masque entre les patientsHebdomadaire AvertissementRemontage du coude Remontage du masqueRemontage du masque Introduisez la valve dans son clip Fig. D-1Rangement Problème Raison possible Solution possibleElimination DépannageCaractéristiques Dimensions du masque SymbolesCode Article produit Informations de commandeGarantie consommateur Page Indicazioni per l’uso Prima di utilizzare la mascheraAvvertenze Come indossare la maschera Uso della mascheraOttimizzazione di tenuta e comfort della maschera Come rimuovere la mascheraPulizia della maschera a domicilio Smontaggio della mascheraRiassemblaggio della maschera Pulizia della maschera tra un paziente e laltroOperazioni quotidiane/dopo ciascun uso Operazioni settimanaliSmaltimento ConservazioneRiassemblaggio del gomito Riassemblaggio della mascheraProblema Possibile causa Possibile soluzione Risoluzione dei problemiSpecifiche tecniche Simboli Parti di ricambio e accessoriMisure della maschera Parte ParteParte Parte Garanzia per il consumatore Page Uso indicado Antes de utilizar la mascarillaAdvertencias Colocación de la mascarilla Uso de la mascarillaOptimización del ajuste y la comodidad Retirada de la mascarilla Desmontaje de la mascarillaLimpieza de la mascarilla en el domicilio Diariamente/Después de cada uso Limpieza de la mascarilla entre pacientesSemanalmente AdvertenciaPara volver a montar la mascarilla Para volver a montar el codoPara volver a montar la mascarilla Problema Posible motivo Posible solución Solución de problemasAlmacenamiento EliminaciónEspecificaciones técnicas Información para solicitudes de envío SímbolosTallas de las mascarillas Núm. Artículo de piezaNúm. Artículo de pieza Garantía para el consumidor Page Fim a que se destina Antes de utilizar a máscaraAvisos Ajuste da máscara Utilização da máscaraRemoção da máscara Desmontagem da máscaraOptimização da vedação e conforto da máscara Limpeza da máscara em casa Diariamente/Após cada utilizaçãoAviso Montagem da máscara Limpeza da máscara entre pacientesMontagem do cotovelo Coloque a válvula no respectivo clipe Fig. D-1Armazenamento EliminaçãoMontagem da máscara Problema Causa possível Solução possível Detecção e resolução de problemasEspecificações técnicas Tamanhos de máscaras Sistema e embalagemInformações para encomendas Número De peça Garantia do consumidorPage Toepassing Opmerkingen voorafWaarschuwingen Masker opzetten en aanpassen Masker gebruikenMaskerafdichting en -comfort optimaliseren Masker afzettenMasker demonteren Masker thuis reinigenWaarschuwing Masker in elkaar zetten Masker reinigen voor gebruik door een volgende patiëntDagelijks/na elk gebruik WekelijksAfvoeren OpslagBocht in elkaar zetten Masker in elkaar zettenNeusbrug te verhogen Probleem Mogelijke oorzaak Mogelijke oplossingTechnische Specificaties Maskermaten SymbolenNr. Artikel BestelinformatieConsumentengarantie

618362 specifications

ResMed 618362 is a cutting-edge medical device designed to revolutionize respiratory therapy for patients with obstructive sleep apnea (OSA) and other respiratory disorders. As part of ResMed's reputation for innovation, this device brings together advanced technology and user-friendly features to enhance patient comfort and treatment adherence.

One of the key features of the ResMed 618362 is its Adaptive Airflow Technology. This technology allows the device to automatically adjust the pressure delivered to the patient based on their breathing patterns. By continuously monitoring the patient’s airflow, it ensures a comfortable experience throughout the night by adapting to changes in their position or sleep stage, minimizing interruptions.

The device is equipped with a sleek, lightweight design, making it highly portable and easy to use. This is particularly beneficial for patients who travel frequently or wish to use the device at different locations. The compact size does not compromise on performance; it maintains consistent pressure levels for effective therapy.

Another noteworthy characteristic of the ResMed 618362 is its Quiet Operation. The device is engineered to produce minimal noise, allowing for a more peaceful sleep environment both for the patient and their partners. This is crucial, as noise can often be a deterrent for patients adhering to their prescribed therapy.

Connectivity is also a strong feature of the ResMed 618362. The device is integrated with cloud technology, enabling healthcare providers to remotely monitor patient data in real-time. This connectivity allows for timely interventions and adjustments in therapy, improving overall treatment outcomes. Patients can also access their usage data through a user-friendly mobile app, empowering them to take an active role in managing their sleep health.

Moreover, the ResMed 618362 emphasizes user comfort with its customizable mask options. The device supports a variety of mask styles, ensuring a proper fit for different facial structures and personal preferences. This helps in reducing the chances of mask leaks and enhances treatment efficacy.

Overall, the ResMed 618362 stands out as a sophisticated solution for those suffering from sleep apnea. With its advanced adaptive technology, portability, quiet operation, and strong connectivity features, it undoubtedly promotes better health outcomes and improves the overall quality of life for users. As healthcare continues to evolve, devices like the ResMed 618362 demonstrate the importance of patient-centered design in respiratory therapy.
Top Page Image Contents