Toshiba SL-9000N-FFR-US, SL-9000N-FFR-QR, SL-9000N-FFR-CA Label lssue Mode, Report and Reset Mode

16. ERROR MESSAGE TABLE

16. ERROR MESSAGE TABLE

● Label lssue Mode

Message

Cause

Solution

DATA ENTRY ERROR

Error in key input.

Press the C key, and re-input the right

data.

PLU NOT FOUND

The PLU # being called out is

Press the C key, and check the PLU #.

not registered.

TOTALS OVERFLOW

GRAND TOTAL or PLU TOTAL

Press the C key, then the

ESC.

key and

memory has been exceeded at

select ‘RESET’.

Then sum up the

the time of issuing a label.

exceeded memory.

MEMORY WILL BE

The machine judges the

Press the C key, then the

ESC.

key and

FULLED

memory is full before

select ‘RESET’. Then sum up

the

designated number of media

exceeded memory.

are printed in Batch mode.

PLU DATA ERROR

Error in the PLU data.

Press the C key, and reprogram PLU

data.

PRT FAILURE DETECTED

Printer trouble.

1. Check that the label and print head are

Media end.

set correctly.

2. If the label home position is misaligned,

press the

FEED

key.

LABEL OVER RUN

Label overruns.

Press the

FEED

key.

● Report and Reset Mode

Message

Cause

Solution

PLU NOT FOUND

Corresponding PLU # is not

Press the C key, and enter the correct

registered.

PLU #.

PRT FAILURE DETECTED

Printer trouble.

Same as in the label issue mode.

LABEL OVER RUN

Label overruns.

Press the

FEED

key.

16- 2