Panasonic WV-CW384 operating instructions Mm or less 11/32 9 mm or less 11/32 Straight type Type

Page 15

bBe sure to view the monitor for adjustment when the camera angle is adjusted.

Supply power to this unit, connect the monitor for adjust- ment (e.g. a small LCD) to the monitor output connector, and adjust the camera angle (turn off the power after view angle adjustment for safety).

1.Loosen the 4 fixing screws of the lens cover to remove the lens cover.

2.Connect the monitor for adjustment to the monitor out- put jack.

Lens cover

Monitor output jack

(ø3.5 mm mini jack (monaural))

Fixing screw x4

Note:

The plug dimensions in the illustration below shall be observed for the monitor for adjustment.

9 mm or less

{11/32"} 9 mm or less {11/32"}

Straight type

L-type

 

 

3.Repeat the steps (1) and (2) to adjust the camera angle.

(1)Loosen the panning lock screw and rotate the cam- era head horizontally to adjust panning.

(2)Loosen the tilting lock screw and rotate the camera head vertically to adjust tilting.

(3)Tighten the panning lock screw and tilting lock screw after camera angle adjustment.

Tilting lock screw

Panning lock screw

Important:

After camera angle adjustment, the panning lock screw and tilting lock screw shall be securely tightened. Recommended tightening torque: 2.45 N·m {1.8 lbf·ft}

Notes:

Use a hexagonal wrench with width across flats of 4 mm (locally procured) to loosen or tighten the panning lock screw and tilting lock screw.

Approximately 1 rotation of loosening the panning lock screw and tilting lock screw allows camera angle adjustment. Do not loosen the screws beyond necessi- ty.

The camera body shall be held when the panning lock screw or tilting lock screw is loosened.

Focus adjustment (page 16) shall be performed when panning and tilting adjustments are performed.

15

Image 15
Contents Operating Instructions English Version Contents Important Safety Instructions Limitation of Liability Disclaimer of WarrantyPreface FeaturesPrecautions Major Operating Controls and Their Functions Precautions for Installation ZSecure the camera to the camera mount bracket Installations/ConnectionsCamera installation PreparationsStretch the tape to approx. twice Twice in length XSecure the camera mount bracket When the camera is directly installed on a wallMount bracket VMake a connection Power connectionWire colors & functions Camera power cord Cord length and wire gauge 24 V ACMm or less 11/32 9 mm or less 11/32 Straight type Type NAdjust the focus MMount the cover Mount the sunshield Screws for tripod socket accessories Safety wire Sunshield mounting stud Pages About Setup MenusSettings items of the camera setup Setup item DescriptionModel WV-CW384 Camera BACK-FOCUS Special Language END Basic operationSetting Procedures Language Setup Language SetupCamera Identification Setting Camera ID Light Control Mode Setting ALC Super Dynamic 3 Function SUPER-D3ALC Back Light Comp SUPER-D3 on Level Shutter Speed Setting Shutter ALC Mode with SUPER-D3 OFFALC Back Light Comp SUPER-D3 OFF Mask SET Level Electronic Sensitivity Enhancement Sens UP Gain Control Setting AGCSynchronization Setting Sync Phase Coarse FineManual Fine Adjustment White Balance Setting White BALMotion Detection Setting Motion DET AWC SettingMotion Detector BW Mode AUTO1 Level High Duration Time Burstbw RET TOP END Digital Noise Reduction Setting DNRResolution Setting Resolution Black and White Mode Setting BW ModePrivacy Zone Setting Privacy Zone Electronic Zoom EL-ZOOMRET TOP END EL-ZOOM PAN/TILT →PUSH Zoom Zoom D LED Setting LED Back-focus Setting BACK-FOCUS SetupAuto Image Stabilizer Stabilizer Special Menu Special Setup Serial number of the camera will be displayed. SER. no Symptom TroubleshootingColor Cctv Cameras SpecificationsAdapter box Standard AccessoriesLens Camera mount bracketVersion Française Table DES Matières Instructions de sécurité importantes Déni de la garantie Limitation de responsabilitéCaractéristiques dominantes PréfaceMesures de précaution Utilisation à de basses températures Principaux organes de commande et fonctions Interférence radio Précautions lors de linstallationEmplacement dinstallation Vis dinstallationPrécaution Installations/ConnexionsInstallation de la caméra vidéo PréparatifsComment enrouler la bande imperméable à leau fournie Traitement imperméable à leauXFixer la platine de fixation de caméra vidéo Quand la caméra vidéo est directement installée sur un murPlatine de fixation Longueur de câble et calibre des fils 24 V c.a VRéaliser les connexionsConnexion de sortie vidéo Connexion d’alimentationRemarques NAjuster la mise au point MRemonter le couvercle Fixer la visière pare-soleil De trépied Câble de sécurité Goujon de fixation de visière pare-soleil Rubrique de Description Pages de Configuration Référence Propos des menus de configurationUtilisation de base Remarque Configuration de la langue Language SetupProcédures de réglage Paramétrage didentification de la caméra vidéo Caméra IDParamétrage de mode de contrôle de lumière ALC Fonction Super Dynamic 3 SUPER-D3Contrôle ALC CONTRE-JOUR SUPER-D3 OUI Niveau Mode ALC avec la fonction SUPER-D3 OFF Réglage de la vitesse d’obturation ShutterContrôle ALC CONTRE-JOUR SUPER-D3 OFF Reglage Masque Niveau Réglage de synchronisation Sync Phase Grossier FINParamétrage de contrôle de gain CAG Accroissement de la sensibilité électronique Vision NuitRéglage précis et manuel Durée Mode DE Visu Alarme OFF Reglage Masque RET PRI FINRéglage de balance des blancs BAL BLC Paramétrage de la détection de mouvement Détect MVTDétecteur de mouvement Paramétrage de la réduction de bruit numérique Réduct Bruit Paramétrage de résolution RésolutionParamétrage du mode monochromatique Mode NB Mode NB AUTO1 Niveau Élevé Duree Burstnb OFF RET PRI FINRET PRI FIN Numero Zone 1/8 Posi →APP Bouton Aire Paramétrage de zone de confidentialité Zone PriveeZoom électronique Zoom Elec Numero ZoneBACK-FOCUS Ajust Stabilisateur dimage automatique StabilisateurParamétrage de diode électroluminescente LED Paramétrage de tirage arrière BACK-FOCUS AjustNo SER Xxxxxxxx RET PRI FIN PIX OFF Reset CAMERA→APP BoutonMenu spécial Ajust Special Ajust SpecialLe paramétrage PIX OFF ne peut pas être initialisé Symptôme DépannageCaméras couleur Cctv Source d’alimentation Caractéristiques techniquesBoîtier adaptateur Accessoires standardObjectif Platine de fixation de caméra vidéoPage Panasonic System Solutions Company Panasonic Canada IncPanasonic Sales Company

WV-CW384 specifications

The Panasonic WV-CW384 is an advanced network camera designed for high-performance surveillance and monitoring applications. This model boasts a range of features and technologies that make it suitable for both indoor and outdoor environments, ensuring comprehensive security coverage.

One of the standout features of the WV-CW384 is its high-resolution 1.3 megapixel sensor, which delivers crisp and clear video images at 30 frames per second. This resolution enables users to capture fine details in various lighting conditions, enhancing the camera's performance in both day and night scenarios. The camera incorporates Panasonic's renowned image processing technology, which optimizes image clarity and reduces noise, providing high-quality video even in low-light environments.

The WV-CW384 is equipped with a powerful motorized optical zoom lens, allowing for flexible field-of-view adjustments. Users can zoom in on specific areas of interest while maintaining image quality, which is essential for detailed surveillance tasks. Furthermore, the camera features pan and tilt capabilities, offering wide-angle coverage and the ability to monitor moving subjects across a broader area.

Another noteworthy characteristic of the WV-CW384 is its support for various network protocols, including Ethernet and wireless connectivity options. This flexibility facilitates easy integration into existing security systems and allows for remote access and monitoring through compatible devices. The camera also supports Power over Ethernet (PoE), simplifying installation by reducing the need for additional power sources.

For enhanced security, the WV-CW384 includes advanced motion detection features, which trigger alerts based on user-defined parameters. This capability helps reduce false alarms by ensuring that the camera only responds to relevant movements. Additionally, the camera can be configured to capture video clips or still images when triggered, providing critical evidence during security incidents.

Overall, the Panasonic WV-CW384 stands out as a reliable and feature-rich surveillance solution. With its high-resolution imaging, optical zoom capabilities, robust network functionality, and intelligent motion detection, this camera is designed to meet the demands of modern security applications, making it an ideal choice for businesses and organizations seeking to enhance their surveillance infrastructure. Its reliability and performance ensure that users can maintain a watchful eye on their premises, providing peace of mind in a variety of monitoring situations.