Panasonic WV-CW384 Privacy Zone Setting Privacy Zone, Electronic Zoom EL-ZOOM

Page 30
**ZONE NUMBER 1/8**
RET TOP END
**ZONE NUMBER 1/8**

12. Privacy Zone Setting (PRIVACY ZONE)

Perform settings of up to eight privacy zones where you wish to veil the monitor screen.

1.Select "ON(1)", "ON(2)" or "OFF" for "PRIVACY ZONE" on page 2 of the "CAMERA SETUP" menu and press the [SET] button. The default setting is "OFF".

ON (1): Veils the zone with grey.

ON (2): Veils the zone with mosaic.

OFF: Displays pictures normally.

→The "ZONE NUMBER" selection menu opens.

2.Select a zone number on the top line using the [LEFT] and [RIGHT] buttons and press the [SET] button. The zone number followed by an asterisk * indicates that it has been already reg- istered.

→"POSITION", "SCALE", and a frame appear on the menu.

3.Select "→PUSH SW" for "POSITION" and press the [SET] but- ton.

→Position selection becomes available.

4.Move the picture portion to be veiled to the center of the frame using the [LEFT], [RIGHT], [UP], or [DOWN] button.

5.Select "→PUSH SW" for "SCALE" and press the [SET] button.

→Zone scale adjustment becomes available.

6.Adjust the zone scale using the [LEFT], [RIGHT], [UP], or [DOWN] button.

7.To apply the settings, move the cursor to "SET" and press the [SET] button.

→The screen returns to the "ZONE NUMBER" selection menu.

To delete the settings, select "DEL" and press the [SET] button.

13. Electronic Zoom (EL-ZOOM)

1.Move the cursor to "EL-ZOOM".

2.Select "ON" or "OFF" by pressing [LEFT] and [RIGHT] buttons. The default setting is "OFF".

ON: x2 electronic zoom is available with the ZOOM switch on the controller.

OFF: The electronic zoom function is disabled.

POSITION

 

 

 

 

→PUSH

 

SW

SCALE

→PUSH

 

SW

 

 

 

 

 

 

 

 

 

 

 

 

SET DEL

RET TOP END

**EL-ZOOM**

 

→PUSH

 

PAN/TILT

SW

ZOOM

→PUSH

SW

U TILT D/L PAN R

3.While the cursor is on "EL-ZOOM", press the [SET] button. The "EL-ZOOM" menu appears.

4.Move the cursor to "→PUSH SW" for "ZOOM" and press the [SET] button to display the "ZOOM" setting menu.

5.Press the [UP] or [DOWN] button to zoom in or out the image.

6.Move the cursor to "→PUSH SW" for "PAN/TILT" and press the [SET] button. The "PAN/TILT" setting menu appears.

7.Press [LEFT], [RIGHT], [UP], or [DOWN] button to change the angular field of view.

RET TOP END

**EL-ZOOM**

PAN/TILT

→PUSH

SW

ZOOM

 

→PUSH

SW

U ZOOM D

RET TOP END

8. To return to the "EL-ZOOM" menu, press the [SET] button.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Operating Instructions English Version Contents Important Safety Instructions Disclaimer of Warranty Limitation of LiabilityFeatures PrefacePrecautions Major Operating Controls and Their Functions Precautions for Installation Preparations Installations/ConnectionsCamera installation ZSecure the camera to the camera mount bracketStretch the tape to approx. twice Twice in length When the camera is directly installed on a wall XSecure the camera mount bracketMount bracket Cord length and wire gauge 24 V AC Power connectionWire colors & functions Camera power cord VMake a connectionMm or less 11/32 9 mm or less 11/32 Straight type Type NAdjust the focus MMount the cover Mount the sunshield Screws for tripod socket accessories Safety wire Sunshield mounting stud Setup item Description About Setup MenusSettings items of the camera setup PagesBasic operation Model WV-CW384 Camera BACK-FOCUS Special Language ENDSetting Procedures Language Setup Language SetupCamera Identification Setting Camera ID Light Control Mode Setting ALC Super Dynamic 3 Function SUPER-D3ALC Back Light Comp SUPER-D3 on Level Shutter Speed Setting Shutter ALC Mode with SUPER-D3 OFFALC Back Light Comp SUPER-D3 OFF Mask SET Level Phase Coarse Fine Gain Control Setting AGCSynchronization Setting Sync Electronic Sensitivity Enhancement Sens UPAWC Setting White Balance Setting White BALMotion Detection Setting Motion DET Manual Fine AdjustmentMotion Detector Black and White Mode Setting BW Mode Digital Noise Reduction Setting DNRResolution Setting Resolution BW Mode AUTO1 Level High Duration Time Burstbw RET TOP ENDPrivacy Zone Setting Privacy Zone Electronic Zoom EL-ZOOMRET TOP END EL-ZOOM PAN/TILT →PUSH Zoom Zoom D LED Setting LED Back-focus Setting BACK-FOCUS SetupAuto Image Stabilizer Stabilizer Special Menu Special Setup Serial number of the camera will be displayed. SER. no Troubleshooting SymptomSpecifications Color Cctv CamerasCamera mount bracket Standard AccessoriesLens Adapter boxVersion Française Table DES Matières Instructions de sécurité importantes Limitation de responsabilité Déni de la garantiePréface Caractéristiques dominantesMesures de précaution Utilisation à de basses températures Principaux organes de commande et fonctions Vis dinstallation Précautions lors de linstallationEmplacement dinstallation Interférence radioPréparatifs Installations/ConnexionsInstallation de la caméra vidéo PrécautionTraitement imperméable à leau Comment enrouler la bande imperméable à leau fournieQuand la caméra vidéo est directement installée sur un mur XFixer la platine de fixation de caméra vidéoPlatine de fixation Connexion d’alimentation VRéaliser les connexionsConnexion de sortie vidéo Longueur de câble et calibre des fils 24 V c.aRemarques NAjuster la mise au point MRemonter le couvercle Fixer la visière pare-soleil De trépied Câble de sécurité Goujon de fixation de visière pare-soleil Propos des menus de configuration Rubrique de Description Pages de Configuration RéférenceUtilisation de base Paramétrage didentification de la caméra vidéo Caméra ID Configuration de la langue Language SetupProcédures de réglage RemarqueParamétrage de mode de contrôle de lumière ALC Fonction Super Dynamic 3 SUPER-D3Contrôle ALC CONTRE-JOUR SUPER-D3 OUI Niveau Mode ALC avec la fonction SUPER-D3 OFF Réglage de la vitesse d’obturation ShutterContrôle ALC CONTRE-JOUR SUPER-D3 OFF Reglage Masque Niveau Accroissement de la sensibilité électronique Vision Nuit Phase Grossier FINParamétrage de contrôle de gain CAG Réglage de synchronisation SyncParamétrage de la détection de mouvement Détect MVT Durée Mode DE Visu Alarme OFF Reglage Masque RET PRI FINRéglage de balance des blancs BAL BLC Réglage précis et manuelDétecteur de mouvement Mode NB AUTO1 Niveau Élevé Duree Burstnb OFF RET PRI FIN Paramétrage de résolution RésolutionParamétrage du mode monochromatique Mode NB Paramétrage de la réduction de bruit numérique Réduct BruitNumero Zone Paramétrage de zone de confidentialité Zone PriveeZoom électronique Zoom Elec RET PRI FIN Numero Zone 1/8 Posi →APP Bouton AireParamétrage de tirage arrière BACK-FOCUS Ajust Stabilisateur dimage automatique StabilisateurParamétrage de diode électroluminescente LED BACK-FOCUS AjustAjust Special PIX OFF Reset CAMERA→APP BoutonMenu spécial Ajust Special No SER Xxxxxxxx RET PRI FINLe paramétrage PIX OFF ne peut pas être initialisé Dépannage SymptômeCaractéristiques techniques Caméras couleur Cctv Source d’alimentationPlatine de fixation de caméra vidéo Accessoires standardObjectif Boîtier adaptateurPage Panasonic System Solutions Company Panasonic Canada IncPanasonic Sales Company

WV-CW384 specifications

The Panasonic WV-CW384 is an advanced network camera designed for high-performance surveillance and monitoring applications. This model boasts a range of features and technologies that make it suitable for both indoor and outdoor environments, ensuring comprehensive security coverage.

One of the standout features of the WV-CW384 is its high-resolution 1.3 megapixel sensor, which delivers crisp and clear video images at 30 frames per second. This resolution enables users to capture fine details in various lighting conditions, enhancing the camera's performance in both day and night scenarios. The camera incorporates Panasonic's renowned image processing technology, which optimizes image clarity and reduces noise, providing high-quality video even in low-light environments.

The WV-CW384 is equipped with a powerful motorized optical zoom lens, allowing for flexible field-of-view adjustments. Users can zoom in on specific areas of interest while maintaining image quality, which is essential for detailed surveillance tasks. Furthermore, the camera features pan and tilt capabilities, offering wide-angle coverage and the ability to monitor moving subjects across a broader area.

Another noteworthy characteristic of the WV-CW384 is its support for various network protocols, including Ethernet and wireless connectivity options. This flexibility facilitates easy integration into existing security systems and allows for remote access and monitoring through compatible devices. The camera also supports Power over Ethernet (PoE), simplifying installation by reducing the need for additional power sources.

For enhanced security, the WV-CW384 includes advanced motion detection features, which trigger alerts based on user-defined parameters. This capability helps reduce false alarms by ensuring that the camera only responds to relevant movements. Additionally, the camera can be configured to capture video clips or still images when triggered, providing critical evidence during security incidents.

Overall, the Panasonic WV-CW384 stands out as a reliable and feature-rich surveillance solution. With its high-resolution imaging, optical zoom capabilities, robust network functionality, and intelligent motion detection, this camera is designed to meet the demands of modern security applications, making it an ideal choice for businesses and organizations seeking to enhance their surveillance infrastructure. Its reliability and performance ensure that users can maintain a watchful eye on their premises, providing peace of mind in a variety of monitoring situations.
Top Page Image Contents