Precautions for Installation

Installing place

Contact your dealer for assistance if you are unsure of an appropriate place in your particular environment.

Make sure that the installation area is strong enough to hold this product, such as a concrete ceiling. When the installa- tion area is not strong enough, reinforce and strengthen it.

Avoid installing this product in the following locations.

•Locations where a chemical agent is used such as a swimming pool

•Locations subject to steam and oil smoke such as a kitchen

•Locations near flammable gas or vapor

•Locations where radiation or x-ray emissions are pro- duced

•Locations subject to strong magnetic field or radio waves

•Locations where corrosive gas is produced

•Locations where it may be damaged by briny air such as seashores

•Locations where the temperature is not within –30 °C to +50 °C {22 °F to 122 °F}*.

* –10 °C to +50 °C {14 °F to 122 °F} at 12 V DC

•Locations subject to vibrations (This product is not designed for on-vehicle use.)

Be sure to remove this product if it is not in use.

White balance

White balance may be not adjusted appropriately in the fol- lowing cases.

•When a subject is extremely less white or nearly single colored

•When a subject is in the outdoors in the morning or evening or in the low illuminance state

•When a subject is in the atmosphere of extremely differ- ent color temperature (e.g. under color illumination)

Keep the video output cable away from the lighting cable.

Failure to observe this may cause noise.

Radio interference

When this product is used near TV/radio antenna, strong electric field or magnetic field (near a motor or a trans- former), images may be distorted and noise sound may be produced. In such a case, run the camera cable through specialized conduit tubes.

Mounting screws

Only the fixing screws are provided to fix this product with the provided mount bracket. It is necessary to procure screws or bolts to mount the product. Prepare them according to the material and strength of the area where the product is to be installed.

The screws and bolts must be tightened with an appropri- ate tightening torque according to the material and strength of the installation area. After tightening the screws or bolts, perform visual check to ensure tightening is enough and there is no backlash.

Piping for cables

If this product is operated outdoors, be sure to install con- necting tubes and run the cables through the tubes to pro- tect the cables from being frozen or direct sunlight.

WV-CW384 specifications

The Panasonic WV-CW384 is an advanced network camera designed for high-performance surveillance and monitoring applications. This model boasts a range of features and technologies that make it suitable for both indoor and outdoor environments, ensuring comprehensive security coverage.

One of the standout features of the WV-CW384 is its high-resolution 1.3 megapixel sensor, which delivers crisp and clear video images at 30 frames per second. This resolution enables users to capture fine details in various lighting conditions, enhancing the camera's performance in both day and night scenarios. The camera incorporates Panasonic's renowned image processing technology, which optimizes image clarity and reduces noise, providing high-quality video even in low-light environments.

The WV-CW384 is equipped with a powerful motorized optical zoom lens, allowing for flexible field-of-view adjustments. Users can zoom in on specific areas of interest while maintaining image quality, which is essential for detailed surveillance tasks. Furthermore, the camera features pan and tilt capabilities, offering wide-angle coverage and the ability to monitor moving subjects across a broader area.

Another noteworthy characteristic of the WV-CW384 is its support for various network protocols, including Ethernet and wireless connectivity options. This flexibility facilitates easy integration into existing security systems and allows for remote access and monitoring through compatible devices. The camera also supports Power over Ethernet (PoE), simplifying installation by reducing the need for additional power sources.

For enhanced security, the WV-CW384 includes advanced motion detection features, which trigger alerts based on user-defined parameters. This capability helps reduce false alarms by ensuring that the camera only responds to relevant movements. Additionally, the camera can be configured to capture video clips or still images when triggered, providing critical evidence during security incidents.

Overall, the Panasonic WV-CW384 stands out as a reliable and feature-rich surveillance solution. With its high-resolution imaging, optical zoom capabilities, robust network functionality, and intelligent motion detection, this camera is designed to meet the demands of modern security applications, making it an ideal choice for businesses and organizations seeking to enhance their surveillance infrastructure. Its reliability and performance ensure that users can maintain a watchful eye on their premises, providing peace of mind in a variety of monitoring situations.