Panasonic WV-CW384 Gain Control Setting AGC, Electronic Sensitivity Enhancement Sens UP

Page 26

4. Gain Control Setting (AGC)

Select an automatic gain control mode. This setting raises the gain and brightens the image under low light conditions. The default setting is "ON (HIGH)".

Available modes: ON (HIGH), ON (MID), ON (LOW), OFF

5. Electronic Sensitivity Enhancement (SENS UP)

Select a proper enhancement rate when the camera is set to ALC mode. The higher rate you select, the brighter the picture will be. The default setting is "OFF".

AUTO: Sets "AGC" to "ON" and adaptively raises the sensitivity up to the selected amplification rate, for example 10 times when set to "X10 AUTO".

FIX: Raises the sensitivity fixedly to the selected rate.

OFF: Does not raise the sensitivity.

OFF X2 AUTO X4 AUTO X6 AUTO X10 AUTO OFF

SUPER-D3 OFF:

SUPER-D3 ON:

X32 FIX X16 FIX X10 FIX X6 FIX X4 FIX X2 FIX

OFF* X2 AUTO X4 AUTO X6 AUTO X10 AUTO

*Default

Notes:

•Some types of system controllers may not operate some of the SENS UP functions. If this happens, use the operation but- tons on the camera.

•When you select "AUTO" for "SENS UP" and "ON" for "SUPER-D3", the SENS UP function has priority so that the SUPER-D3 function is not activated automatically.

•While the SENS UP function is selected, noise, spots or a whitish phenomenon may appear in the picture when the sensi- tivity of the camera is increased. This is a normal phenomenon.

•Only when "OFF", "X2 FIX", or "X2 AUTO" is selected for sensitivity enhancement (SENS UP), it is possible to perform ABF adjustment or to select "AUTO" for "C/L ←→ B/W" on the "BACK-FOCUS SETUP" menu. When a sensitivity rate other than "X2 FIX" or "X2 AUTO" is selected, use "PRESET" and "FIX" for "C/L ←→ B/W" on the "BACK-FOCUS SETUP" menu.

6. Synchronization Setting (SYNC)

1.Select a sync mode.

VD2: Multiplexed vertical drive, highest priority

LL:Line-Lock, follows the phase of supplied AC power, 2nd

priority

INT: Internal sync, lowest priority

Notes:

•Selection is not available when VD2 is added to the camera. Selection from "LL" is available when the respective sync is added.

•When "LL" is selected, phase adjustment is required.

 

**SYNC**

 

V PHASE

 

 

 

 

COARSE

 

 

1

(1--16)

FINE

 

...I...128

 

-

 

+

RET TOP END

2.Line-Lock Vertical Phase Adjustment (V PHASE)

• Select "LL" and press the [SET] button.

• Prepare a dual-trace oscilloscope and supply it with the video output of the camera to be adjusted and that of the refer- ence camera.

• Set the oscilloscope to the vertical rate and expand the V-sync portion.

• Select a proper "COARSE" phase from 16 steps (22.5 degrees/step) that makes the two video signals on the oscilloscope the closest.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Operating Instructions English Version Contents Important Safety Instructions Disclaimer of Warranty Limitation of LiabilityFeatures PrefacePrecautions Major Operating Controls and Their Functions Precautions for Installation Preparations Installations/ConnectionsCamera installation ZSecure the camera to the camera mount bracketStretch the tape to approx. twice Twice in length When the camera is directly installed on a wall XSecure the camera mount bracketMount bracket Cord length and wire gauge 24 V AC Power connectionWire colors & functions Camera power cord VMake a connectionMm or less 11/32 9 mm or less 11/32 Straight type Type NAdjust the focus MMount the cover Mount the sunshield Screws for tripod socket accessories Safety wire Sunshield mounting stud Setup item Description About Setup MenusSettings items of the camera setup PagesBasic operation Model WV-CW384 Camera BACK-FOCUS Special Language ENDCamera Identification Setting Camera ID Setting ProceduresLanguage Setup Language Setup ALC Back Light Comp SUPER-D3 on Level Light Control Mode Setting ALCSuper Dynamic 3 Function SUPER-D3 ALC Back Light Comp SUPER-D3 OFF Mask SET Level Shutter Speed Setting ShutterALC Mode with SUPER-D3 OFF Phase Coarse Fine Gain Control Setting AGCSynchronization Setting Sync Electronic Sensitivity Enhancement Sens UPAWC Setting White Balance Setting White BALMotion Detection Setting Motion DET Manual Fine AdjustmentMotion Detector Black and White Mode Setting BW Mode Digital Noise Reduction Setting DNRResolution Setting Resolution BW Mode AUTO1 Level High Duration Time Burstbw RET TOP ENDRET TOP END EL-ZOOM PAN/TILT →PUSH Zoom Zoom D Privacy Zone Setting Privacy ZoneElectronic Zoom EL-ZOOM Auto Image Stabilizer Stabilizer LED Setting LEDBack-focus Setting BACK-FOCUS Setup Special Menu Special Setup Serial number of the camera will be displayed. SER. no Troubleshooting SymptomSpecifications Color Cctv CamerasCamera mount bracket Standard AccessoriesLens Adapter boxVersion Française Table DES Matières Instructions de sécurité importantes Limitation de responsabilité Déni de la garantiePréface Caractéristiques dominantesMesures de précaution Utilisation à de basses températures Principaux organes de commande et fonctions Vis dinstallation Précautions lors de linstallationEmplacement dinstallation Interférence radioPréparatifs Installations/ConnexionsInstallation de la caméra vidéo PrécautionTraitement imperméable à leau Comment enrouler la bande imperméable à leau fournieQuand la caméra vidéo est directement installée sur un mur XFixer la platine de fixation de caméra vidéoPlatine de fixation Connexion d’alimentation VRéaliser les connexionsConnexion de sortie vidéo Longueur de câble et calibre des fils 24 V c.aRemarques NAjuster la mise au point MRemonter le couvercle Fixer la visière pare-soleil De trépied Câble de sécurité Goujon de fixation de visière pare-soleil Propos des menus de configuration Rubrique de Description Pages de Configuration RéférenceUtilisation de base Paramétrage didentification de la caméra vidéo Caméra ID Configuration de la langue Language SetupProcédures de réglage RemarqueContrôle ALC CONTRE-JOUR SUPER-D3 OUI Niveau Paramétrage de mode de contrôle de lumière ALCFonction Super Dynamic 3 SUPER-D3 Contrôle ALC CONTRE-JOUR SUPER-D3 OFF Reglage Masque Niveau Mode ALC avec la fonction SUPER-D3 OFFRéglage de la vitesse d’obturation Shutter Accroissement de la sensibilité électronique Vision Nuit Phase Grossier FINParamétrage de contrôle de gain CAG Réglage de synchronisation SyncParamétrage de la détection de mouvement Détect MVT Durée Mode DE Visu Alarme OFF Reglage Masque RET PRI FINRéglage de balance des blancs BAL BLC Réglage précis et manuelDétecteur de mouvement Mode NB AUTO1 Niveau Élevé Duree Burstnb OFF RET PRI FIN Paramétrage de résolution RésolutionParamétrage du mode monochromatique Mode NB Paramétrage de la réduction de bruit numérique Réduct BruitNumero Zone Paramétrage de zone de confidentialité Zone PriveeZoom électronique Zoom Elec RET PRI FIN Numero Zone 1/8 Posi →APP Bouton AireParamétrage de tirage arrière BACK-FOCUS Ajust Stabilisateur dimage automatique StabilisateurParamétrage de diode électroluminescente LED BACK-FOCUS AjustAjust Special PIX OFF Reset CAMERA→APP BoutonMenu spécial Ajust Special No SER Xxxxxxxx RET PRI FINLe paramétrage PIX OFF ne peut pas être initialisé Dépannage SymptômeCaractéristiques techniques Caméras couleur Cctv Source d’alimentationPlatine de fixation de caméra vidéo Accessoires standardObjectif Boîtier adaptateurPage Panasonic Sales Company Panasonic System Solutions CompanyPanasonic Canada Inc

WV-CW384 specifications

The Panasonic WV-CW384 is an advanced network camera designed for high-performance surveillance and monitoring applications. This model boasts a range of features and technologies that make it suitable for both indoor and outdoor environments, ensuring comprehensive security coverage.

One of the standout features of the WV-CW384 is its high-resolution 1.3 megapixel sensor, which delivers crisp and clear video images at 30 frames per second. This resolution enables users to capture fine details in various lighting conditions, enhancing the camera's performance in both day and night scenarios. The camera incorporates Panasonic's renowned image processing technology, which optimizes image clarity and reduces noise, providing high-quality video even in low-light environments.

The WV-CW384 is equipped with a powerful motorized optical zoom lens, allowing for flexible field-of-view adjustments. Users can zoom in on specific areas of interest while maintaining image quality, which is essential for detailed surveillance tasks. Furthermore, the camera features pan and tilt capabilities, offering wide-angle coverage and the ability to monitor moving subjects across a broader area.

Another noteworthy characteristic of the WV-CW384 is its support for various network protocols, including Ethernet and wireless connectivity options. This flexibility facilitates easy integration into existing security systems and allows for remote access and monitoring through compatible devices. The camera also supports Power over Ethernet (PoE), simplifying installation by reducing the need for additional power sources.

For enhanced security, the WV-CW384 includes advanced motion detection features, which trigger alerts based on user-defined parameters. This capability helps reduce false alarms by ensuring that the camera only responds to relevant movements. Additionally, the camera can be configured to capture video clips or still images when triggered, providing critical evidence during security incidents.

Overall, the Panasonic WV-CW384 stands out as a reliable and feature-rich surveillance solution. With its high-resolution imaging, optical zoom capabilities, robust network functionality, and intelligent motion detection, this camera is designed to meet the demands of modern security applications, making it an ideal choice for businesses and organizations seeking to enhance their surveillance infrastructure. Its reliability and performance ensure that users can maintain a watchful eye on their premises, providing peace of mind in a variety of monitoring situations.
Top Page Image Contents