Panasonic WV-CW384 operating instructions Special Menu Special Setup

Page 32

FIX: Fixes the back-focus after adjustment.

5.Select "ON" or "OFF" for "SETUP-SW LOCK". The default setting is "OFF".

OFF: Enables the [SET] button to open the back-focus adjustment screen while the camera picture is displayed.

ON: Disables the [SET] button from opening the back-focus adjustment screen.

6.To reset the back-focus to the default setting, press the [LEFT] and [RIGHT] buttons simultaneously.

Important:

Select "FIX" or "PRESET" and adjust manually the back-focus when automatic adjustment is hindered by the following conditions.

1.Dirt or a water drip attached to window glass

This causes defocus on the object beyond the glass.

2.Objects in low lighting conditions

3.Objects extremely bright

4.Flat contrast objects such as white wall or fine felt

5.Objects placed on the outskirts of the scene

6.More than one object placed with a certain depth

7.An object having a certain depth

8.Objects continuously moving such as busy streets

9.Objects extremely flickering

10.Objects consisting of parallel horizontal lines such as a window shade

Matsushita Electric Industrial Co., Ltd shall not be responsible for any inconvenience, damage or loss caused by or attribute to inappropriate settings for the ABF function.

17. Special Menu (SPECIAL SETUP)

Select "SPECIAL" on the top menu and press the [SET] button.

The "SPECIAL SETUP" menu opens.

17-1. Chroma Level Setting (CHROMA GAIN)

Move the "I" cursor to adjust the chroma level.

17-2. Aperture Gain Setting (AP GAIN)

**SPECIAL SETUP**

 

 

CHROMA GAIN

...I...

128

AP GAIN

...I...

128

PEDESTAL

...I...128

HUE

...I...128

 

+

PIX OFF

CAMERA RESET PUSH SW

SER.NO. XXXXXXXX

RET TOP END

Move the "I" cursor to adjust the aperture gain level.

Lower the level when moire (a kind of noise, optical interference) appears on the screen as part of minute crosshatch pattern, etc.

17-3. Pedestal Level Setting (PEDESTAL)

Move the "I" cursor to adjust the pedestal level (black level).

17-4. Chroma Phase (Hue) Setting (HUE)

Move the "I" cursor to adjust the hue (chroma phase) level.

17-5. Pixel Compensation Setting (PIX OFF)

Perform settings to compensate a maximum of 16 blemish pixels on the pickup device.

1.Select "PIX OFF" and press the [SET] button.

The "PIX OFF" menu opens with numbers from 1 to 16.

2.Select a number and press the [SET] button.

The "PIX OFF" assignment screen opens with a + cursor.

 

 

**PIX OFF**

 

 

 

2

3

4

1

 

5

6

7

8

9

10

11

12

13

14

15

16

000000

RET TOP END

32

Image 32
Contents Operating Instructions English Version Contents Important Safety Instructions Disclaimer of Warranty Limitation of LiabilityFeatures PrefacePrecautions Major Operating Controls and Their Functions Precautions for Installation Installations/Connections Camera installationPreparations ZSecure the camera to the camera mount bracketStretch the tape to approx. twice Twice in length When the camera is directly installed on a wall XSecure the camera mount bracketMount bracket Power connection Wire colors & functions Camera power cordCord length and wire gauge 24 V AC VMake a connectionMm or less 11/32 9 mm or less 11/32 Straight type Type NAdjust the focus MMount the cover Mount the sunshield Screws for tripod socket accessories Safety wire Sunshield mounting stud About Setup Menus Settings items of the camera setupSetup item Description PagesBasic operation Model WV-CW384 Camera BACK-FOCUS Special Language ENDCamera Identification Setting Camera ID Setting ProceduresLanguage Setup Language Setup ALC Back Light Comp SUPER-D3 on Level Light Control Mode Setting ALCSuper Dynamic 3 Function SUPER-D3 ALC Back Light Comp SUPER-D3 OFF Mask SET Level Shutter Speed Setting ShutterALC Mode with SUPER-D3 OFF Gain Control Setting AGC Synchronization Setting SyncPhase Coarse Fine Electronic Sensitivity Enhancement Sens UPWhite Balance Setting White BAL Motion Detection Setting Motion DETAWC Setting Manual Fine AdjustmentMotion Detector Digital Noise Reduction Setting DNR Resolution Setting ResolutionBlack and White Mode Setting BW Mode BW Mode AUTO1 Level High Duration Time Burstbw RET TOP ENDRET TOP END EL-ZOOM PAN/TILT →PUSH Zoom Zoom D Privacy Zone Setting Privacy ZoneElectronic Zoom EL-ZOOM Auto Image Stabilizer Stabilizer LED Setting LEDBack-focus Setting BACK-FOCUS Setup Special Menu Special Setup Serial number of the camera will be displayed. SER. no Troubleshooting SymptomSpecifications Color Cctv CamerasStandard Accessories LensCamera mount bracket Adapter boxVersion Française Table DES Matières Instructions de sécurité importantes Limitation de responsabilité Déni de la garantiePréface Caractéristiques dominantesMesures de précaution Utilisation à de basses températures Principaux organes de commande et fonctions Précautions lors de linstallation Emplacement dinstallationVis dinstallation Interférence radioInstallations/Connexions Installation de la caméra vidéoPréparatifs PrécautionTraitement imperméable à leau Comment enrouler la bande imperméable à leau fournieQuand la caméra vidéo est directement installée sur un mur XFixer la platine de fixation de caméra vidéoPlatine de fixation VRéaliser les connexions Connexion de sortie vidéoConnexion d’alimentation Longueur de câble et calibre des fils 24 V c.aRemarques NAjuster la mise au point MRemonter le couvercle Fixer la visière pare-soleil De trépied Câble de sécurité Goujon de fixation de visière pare-soleil Propos des menus de configuration Rubrique de Description Pages de Configuration RéférenceUtilisation de base Configuration de la langue Language Setup Procédures de réglageParamétrage didentification de la caméra vidéo Caméra ID RemarqueContrôle ALC CONTRE-JOUR SUPER-D3 OUI Niveau Paramétrage de mode de contrôle de lumière ALCFonction Super Dynamic 3 SUPER-D3 Contrôle ALC CONTRE-JOUR SUPER-D3 OFF Reglage Masque Niveau Mode ALC avec la fonction SUPER-D3 OFFRéglage de la vitesse d’obturation Shutter Phase Grossier FIN Paramétrage de contrôle de gain CAGAccroissement de la sensibilité électronique Vision Nuit Réglage de synchronisation SyncDurée Mode DE Visu Alarme OFF Reglage Masque RET PRI FIN Réglage de balance des blancs BAL BLCParamétrage de la détection de mouvement Détect MVT Réglage précis et manuelDétecteur de mouvement Paramétrage de résolution Résolution Paramétrage du mode monochromatique Mode NBMode NB AUTO1 Niveau Élevé Duree Burstnb OFF RET PRI FIN Paramétrage de la réduction de bruit numérique Réduct BruitParamétrage de zone de confidentialité Zone Privee Zoom électronique Zoom ElecNumero Zone RET PRI FIN Numero Zone 1/8 Posi →APP Bouton AireStabilisateur dimage automatique Stabilisateur Paramétrage de diode électroluminescente LEDParamétrage de tirage arrière BACK-FOCUS Ajust BACK-FOCUS AjustPIX OFF Reset CAMERA→APP Bouton Menu spécial Ajust SpecialAjust Special No SER Xxxxxxxx RET PRI FINLe paramétrage PIX OFF ne peut pas être initialisé Dépannage SymptômeCaractéristiques techniques Caméras couleur Cctv Source d’alimentationAccessoires standard ObjectifPlatine de fixation de caméra vidéo Boîtier adaptateurPage Panasonic Sales Company Panasonic System Solutions CompanyPanasonic Canada Inc

WV-CW384 specifications

The Panasonic WV-CW384 is an advanced network camera designed for high-performance surveillance and monitoring applications. This model boasts a range of features and technologies that make it suitable for both indoor and outdoor environments, ensuring comprehensive security coverage.

One of the standout features of the WV-CW384 is its high-resolution 1.3 megapixel sensor, which delivers crisp and clear video images at 30 frames per second. This resolution enables users to capture fine details in various lighting conditions, enhancing the camera's performance in both day and night scenarios. The camera incorporates Panasonic's renowned image processing technology, which optimizes image clarity and reduces noise, providing high-quality video even in low-light environments.

The WV-CW384 is equipped with a powerful motorized optical zoom lens, allowing for flexible field-of-view adjustments. Users can zoom in on specific areas of interest while maintaining image quality, which is essential for detailed surveillance tasks. Furthermore, the camera features pan and tilt capabilities, offering wide-angle coverage and the ability to monitor moving subjects across a broader area.

Another noteworthy characteristic of the WV-CW384 is its support for various network protocols, including Ethernet and wireless connectivity options. This flexibility facilitates easy integration into existing security systems and allows for remote access and monitoring through compatible devices. The camera also supports Power over Ethernet (PoE), simplifying installation by reducing the need for additional power sources.

For enhanced security, the WV-CW384 includes advanced motion detection features, which trigger alerts based on user-defined parameters. This capability helps reduce false alarms by ensuring that the camera only responds to relevant movements. Additionally, the camera can be configured to capture video clips or still images when triggered, providing critical evidence during security incidents.

Overall, the Panasonic WV-CW384 stands out as a reliable and feature-rich surveillance solution. With its high-resolution imaging, optical zoom capabilities, robust network functionality, and intelligent motion detection, this camera is designed to meet the demands of modern security applications, making it an ideal choice for businesses and organizations seeking to enhance their surveillance infrastructure. Its reliability and performance ensure that users can maintain a watchful eye on their premises, providing peace of mind in a variety of monitoring situations.