Panasonic WV-CW384 operating instructions Precautions

Page 7

Precautions

This product has no power switch.

Power is supplied from an external 12 V DC/24 V AC power-supply device. Refer to service personnel for how to turn on/off the power.

To keep on using with stable performance

Parts of this product may deteriorate and it may shorten lifetime of the product when using in locations subject to high temperatures and high humidity.

Do not expose the product to direct heat such from a heater.

Use this product at temperature within –30 °C to +50 °C {22 °F to 122 °F}* and humidity below 90 %.

* –10 °C to +50 °C {14 °F to 122 °F} at 12 V DC

Do not drop metallic parts through slots.

This could permanently damage this product. Turn the power off immediately and contact qualified service per- sonnel for service.

Do not rub the edges of metal parts with your hand.

Failure to observe this may cause injury.

Do not attempt to disassemble this product.

To prevent electric shock, do not remove screws or covers. There are no user-serviceable parts inside.

Ask qualified service personnel for servicing.

Handle this product with care.

Do not abuse this product. Avoid striking, shaking, etc.

The product could be damaged by improper handling or storage.

Cleaning this product body

Turn the power off when cleaning the product. Use a dry cloth to clean the product. Do not use strong abrasive detergent when cleaning the product body. When the dirt is hard to remove, use a mild detergent and wipe gently. Then, wipe off the remaining detergent with a dry cloth.

Otherwise, it may cause discoloration. When using a chemi- cal cloth for cleaning, read the caution provided with the chemical cloth product.

Clean the lens with care.

Do not clean the lens with strong or abrasive detergents. Use lens tissue or a cotton tipped applicator and ethanol.

Discoloration on the CCD color filter

When continuously shooting a bright light source such as a spotlight, the color filter of the CCD may have deteriorated and it may cause discoloration.

Even when changing the fixed shooting direction after con- tinuously shooting a spotlight for a certain period, the dis- coloration may remain.

Do not aim this product at strong light sources.

A light source such as a spot light causes a blooming (light bleeding) or a smear (vertical lines).

Smear

Bright subject

Blooming

About the dehumidifying device

This product has dehumidifying device to keep the inside at low moisture level, preventing condensation and quickly dissipating dew if produced.

Dew may be produced depending on the conditions of temperature, humidity, winds, and rain, and it may take time to dehumidify.

Never seal the surfaces of the dehumidifying device.

Dehumidifying device

Turn the circuit breaker off which supplies this product with the power when abnormal conditions are encoun- tered.

Do not operate this product beyond the specified tem- perature, humidity or power source ratings.

Use this product at temperature within –30 °C to +50 °C {22 °F to 122 °F}* and humidity below 90 %. The input power source is 12 V DC/24 V AC.

* –10 °C to +50 °C {14 °F to 122 °F} at 12 V DC

Use at low temperatures

To operate the camera at temperatures of –10 °C {14 °F} or lower, it will take 30 minutes or more after turning on the power to warm up the camera.

Images may be disturbed because the built-in heater is automatically toggled between ON and OFF resulting from a change in usage environment.

What to do if OVER HEAT appears on the display.

This message indicates that the inside of this product has become extremely hot. Immediately turn off the product and contact your dealer.

7

Image 7
Contents Operating Instructions English Version Contents Important Safety Instructions Limitation of Liability Disclaimer of WarrantyPreface FeaturesPrecautions Major Operating Controls and Their Functions Precautions for Installation ZSecure the camera to the camera mount bracket Installations/ConnectionsCamera installation PreparationsStretch the tape to approx. twice Twice in length XSecure the camera mount bracket When the camera is directly installed on a wallMount bracket VMake a connection Power connectionWire colors & functions Camera power cord Cord length and wire gauge 24 V ACMm or less 11/32 9 mm or less 11/32 Straight type Type NAdjust the focus MMount the cover Mount the sunshield Screws for tripod socket accessories Safety wire Sunshield mounting stud Pages About Setup MenusSettings items of the camera setup Setup item DescriptionModel WV-CW384 Camera BACK-FOCUS Special Language END Basic operationLanguage Setup Language Setup Setting ProceduresCamera Identification Setting Camera ID Super Dynamic 3 Function SUPER-D3 Light Control Mode Setting ALCALC Back Light Comp SUPER-D3 on Level ALC Mode with SUPER-D3 OFF Shutter Speed Setting ShutterALC Back Light Comp SUPER-D3 OFF Mask SET Level Electronic Sensitivity Enhancement Sens UP Gain Control Setting AGCSynchronization Setting Sync Phase Coarse FineManual Fine Adjustment White Balance Setting White BALMotion Detection Setting Motion DET AWC SettingMotion Detector BW Mode AUTO1 Level High Duration Time Burstbw RET TOP END Digital Noise Reduction Setting DNRResolution Setting Resolution Black and White Mode Setting BW ModeElectronic Zoom EL-ZOOM Privacy Zone Setting Privacy ZoneRET TOP END EL-ZOOM PAN/TILT →PUSH Zoom Zoom D Back-focus Setting BACK-FOCUS Setup LED Setting LEDAuto Image Stabilizer Stabilizer Special Menu Special Setup Serial number of the camera will be displayed. SER. no Symptom TroubleshootingColor Cctv Cameras SpecificationsAdapter box Standard AccessoriesLens Camera mount bracketVersion Française Table DES Matières Instructions de sécurité importantes Déni de la garantie Limitation de responsabilitéCaractéristiques dominantes PréfaceMesures de précaution Utilisation à de basses températures Principaux organes de commande et fonctions Interférence radio Précautions lors de linstallationEmplacement dinstallation Vis dinstallationPrécaution Installations/ConnexionsInstallation de la caméra vidéo PréparatifsComment enrouler la bande imperméable à leau fournie Traitement imperméable à leauXFixer la platine de fixation de caméra vidéo Quand la caméra vidéo est directement installée sur un murPlatine de fixation Longueur de câble et calibre des fils 24 V c.a VRéaliser les connexionsConnexion de sortie vidéo Connexion d’alimentationRemarques NAjuster la mise au point MRemonter le couvercle Fixer la visière pare-soleil De trépied Câble de sécurité Goujon de fixation de visière pare-soleil Rubrique de Description Pages de Configuration Référence Propos des menus de configurationUtilisation de base Remarque Configuration de la langue Language SetupProcédures de réglage Paramétrage didentification de la caméra vidéo Caméra IDFonction Super Dynamic 3 SUPER-D3 Paramétrage de mode de contrôle de lumière ALCContrôle ALC CONTRE-JOUR SUPER-D3 OUI Niveau Réglage de la vitesse d’obturation Shutter Mode ALC avec la fonction SUPER-D3 OFFContrôle ALC CONTRE-JOUR SUPER-D3 OFF Reglage Masque Niveau Réglage de synchronisation Sync Phase Grossier FINParamétrage de contrôle de gain CAG Accroissement de la sensibilité électronique Vision NuitRéglage précis et manuel Durée Mode DE Visu Alarme OFF Reglage Masque RET PRI FINRéglage de balance des blancs BAL BLC Paramétrage de la détection de mouvement Détect MVTDétecteur de mouvement Paramétrage de la réduction de bruit numérique Réduct Bruit Paramétrage de résolution RésolutionParamétrage du mode monochromatique Mode NB Mode NB AUTO1 Niveau Élevé Duree Burstnb OFF RET PRI FINRET PRI FIN Numero Zone 1/8 Posi →APP Bouton Aire Paramétrage de zone de confidentialité Zone PriveeZoom électronique Zoom Elec Numero ZoneBACK-FOCUS Ajust Stabilisateur dimage automatique StabilisateurParamétrage de diode électroluminescente LED Paramétrage de tirage arrière BACK-FOCUS AjustNo SER Xxxxxxxx RET PRI FIN PIX OFF Reset CAMERA→APP BoutonMenu spécial Ajust Special Ajust SpecialLe paramétrage PIX OFF ne peut pas être initialisé Symptôme DépannageCaméras couleur Cctv Source d’alimentation Caractéristiques techniquesBoîtier adaptateur Accessoires standardObjectif Platine de fixation de caméra vidéoPage Panasonic Canada Inc Panasonic System Solutions CompanyPanasonic Sales Company

WV-CW384 specifications

The Panasonic WV-CW384 is an advanced network camera designed for high-performance surveillance and monitoring applications. This model boasts a range of features and technologies that make it suitable for both indoor and outdoor environments, ensuring comprehensive security coverage.

One of the standout features of the WV-CW384 is its high-resolution 1.3 megapixel sensor, which delivers crisp and clear video images at 30 frames per second. This resolution enables users to capture fine details in various lighting conditions, enhancing the camera's performance in both day and night scenarios. The camera incorporates Panasonic's renowned image processing technology, which optimizes image clarity and reduces noise, providing high-quality video even in low-light environments.

The WV-CW384 is equipped with a powerful motorized optical zoom lens, allowing for flexible field-of-view adjustments. Users can zoom in on specific areas of interest while maintaining image quality, which is essential for detailed surveillance tasks. Furthermore, the camera features pan and tilt capabilities, offering wide-angle coverage and the ability to monitor moving subjects across a broader area.

Another noteworthy characteristic of the WV-CW384 is its support for various network protocols, including Ethernet and wireless connectivity options. This flexibility facilitates easy integration into existing security systems and allows for remote access and monitoring through compatible devices. The camera also supports Power over Ethernet (PoE), simplifying installation by reducing the need for additional power sources.

For enhanced security, the WV-CW384 includes advanced motion detection features, which trigger alerts based on user-defined parameters. This capability helps reduce false alarms by ensuring that the camera only responds to relevant movements. Additionally, the camera can be configured to capture video clips or still images when triggered, providing critical evidence during security incidents.

Overall, the Panasonic WV-CW384 stands out as a reliable and feature-rich surveillance solution. With its high-resolution imaging, optical zoom capabilities, robust network functionality, and intelligent motion detection, this camera is designed to meet the demands of modern security applications, making it an ideal choice for businesses and organizations seeking to enhance their surveillance infrastructure. Its reliability and performance ensure that users can maintain a watchful eye on their premises, providing peace of mind in a variety of monitoring situations.