Testing Testing with a Control Solution
Gently rock the control bottle before opening to ensure it is mixed well.
Squeeze a small drop of control solution on a clean non- absorbent surface, such as a piece of wax paper.
Do not apply control solution to the test strip directly from the bottle.
Replace the cap on the control solution bottle.
Immediately touch the tip of the test strip to the drop of control solution. The solution is pulled into the test strip through the tip.
Hold it in the drop until the meter beeps.
After the beep, you will see the meter count down eight seconds until the test is complete and your control test result is displayed.
16 | Need Help? Call toll free: |