CONTOUR TS Meter Display:
A full display, as shown below, indicates that all characters in the display are working properly. You will briefly see this display each time you turn the meter on. You can see the complete display when the meter is off by pressing and holding the button. Compare your meter to the display shown below.
While all characters are displayed, it is most important to
verify that is fully displayed. If there is a difference, see Error Codes and Symbols (page 25). This may affect the way you see your results.
Meter Display Important
Indicates | Indicates it is too cold or |
the meter is | too hot for your meter |
ready to test. | to test accurately. |
Indicates the battery is low and needs to be changed.
CONTOUR TS
Control result marker.
14 day average.
Center area on the display that shows either your test result or any error codes.
Results are displayed as either mg/dL or mmol/L.
or Displays the date format.
Beeper on/off | Bottom area on |
indicator. | the display show- |
| ing date and time. |
or will appear if the meter is in 12 hour setup.
www.bayerdiabetes.com/us3