Setting the Date, Time and Sound:
You can set your meter to display different options.
To get into setup mode, press and hold 
for three seconds. The com- plete display will briefly appear, then go to a display with the time.
NOTE: You may turn the
meter off at any time during setup by pressing and holding 
until the meter turns off.
Setting the Date,
Setup Time and Sound
Setting the Time:
The number in the hour position will be flashing. Press 
until you reach the correct hour.
Press 
to set.
The number in the minute position will now flash. Press 
until you reach the correct minutes.
Press 
to set.
18 | Need Help? Call toll free: |