Fluke specifications 114, 115, 116, and 117 Calibration Information

114, 115, 116, and 117 Calibration Information

Table 4. Calibration Adjustment Steps (cont)

Rotary			Calibration Steps			Input	Calibrator
Switch
		114	[1]	[1]	[1,2]	Terminals	Source Value
Position			115	116	117
$		N/A	N/A	C/23	N/A	+ and COM	600 μA, 0 Hz
DC μamps
[1]	Models listed in this column also refer to the “C” version of the model. For example, model 115 steps are valid for the 115C.
[2]	Do not calibrate the 117 or 117C with a line-frequency power source nearby (e.g. fluorescent light, power strip, etc.). These devices
	can produce errors in the VoltAlert calibration.
[3]	Wait an additional 5 seconds after calibrator has settled before pressing g.

16