Configuration files

Signal Assignments on Probe Pods

There are signal connections for up to 6 different logic analyzer adapter cables (E5378A). This provides the user with some flexibility in terms of which signals they connect to based on the type of analysis that is needed, e.g. SB or NB only, all trigger events, SB and NB traffic together, etc. The 16753/4/5/6 cards require the E5378A adapter cables. 1 Adapter cable is required for 2 logic analyzer pods.

Logic Analyzer card requirements

The FS2343 FBDIMM Probe requires up to five logic analyzer cards depending on what decode information is required by the user. There are several different configuration files provided for the following applications. Note: all these configurations require the use of 16753/4/5/6 cards and Dual Sample Mode in the Logic Analyzer.

Probe Configuration

Configuration

File

Probe Connections to the

Analyzer

State Analysis requirement

SB and NB up to 533 Mb/s	FB238_5	J10 (Master) Odd and
with 10 trigger bits		Even, J13 Odd and Even,
		J9 odd/even, J11 Odd and
		Even, J12 Odd and Even
SB Only and 8 Trigger bits	FB238_4	J9 Even, J10 (Master) Odd
		and Even, J12 Even, J13
		Odd and Even

NB Only and 9 Trigger bits	FB238_3	J9 Odd and Even, J11
		Odd and Even, J12 Odd
		and Even, J15 (Master)
		Odd

Full NB and SB with 5	FB238_2	J9 Odd and Even, J10
Trigger bits		(Master) Odd and Even,
		J11 Odd and Even, J12
		Odd, J13 Odd and Even

12 lane NB and SB with 10	FB238_1	J9 Odd and Even, J10
Trigger bits		(Master) Odd and Even,
		J11 Odd and Even, J12
		Even, J13 Odd and Even

3 cards configured as one module for speeds up to 533 Mb/s

3 cards configured as one module, one dual sample state machine

4 cards configured as one module, one dual sample state machine

5 cards configured as one module, one dual sample state machine