Agilent Technologies FS2343 Software Requirements, Setting up the 169xx Analyzer, 169xx Licensing

Page 13

FBDIMM Paddle Board Connector layout

Software Requirements

For state analysis you must have version A.02.99.00 or later Agilent OS installed on the 1690x frame. Version A.02.99.00 contains the capability for SMBus control of the probe through the 16753/4/5/6 or 16950 cards.

Setting up the 169xx Analyzer

A CD containing the 16900 software is included in the FS2343 package. The CD contains a setup file that will automatically install the configuration files and protocol decoder onto a PC containing the 16900 operating system or onto a 16900 analyzer itself.

To install the software simply double click the FBDIMM.exe file on the CD containing the 16900 software. After accepting the license agreement the software should install within a couple of minutes.

169xx Licensing

Once the software has been successfully installed you must license the software. Please refer to the entitlement certificate for instructions on licensing the software. The software can only be installed on one machine. If you need to install the software on more than one machine you must contact the FuturePlus sales department to purchase additional licenses.

Loading 169xx configuration files and General Purpose Probe feature

When the software has been licensed you should be ready to load a configuration file. You can access the configuration files by clicking on the folder that was placed on the desktop. When you click on the folder it should open up to display all the configuration files to choose from. If you put your mouse cursor on the name of the file a description will appear telling you what the setup consists of, once you choose the configuration file that is appropriate for your configuration the 16900 operating system should execute it. The protocol decoder automatically loads when the configuration file is loaded. If the decoder does not load, you may load it by selecting Tools from the menu bar at the top of the screen and select the decoder from the list.

After loading the configuration file of choice, the user should see both the Probe Control application icon and the FBDIMM configuration and decoder icon in the Probes column on the Overview page. Clicking on the Properties button of the FBDIMM Config icon will display the General Purpose Probe Set as defined for this configuration.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Fbdimm Interposer Probe FS2343 Product Warranty Symbols For Sales and Marketing Support For Technical SupportAssistance Limitation of warrantyExclusive Remedies Software License Agreement Probe Performance Limitation IntroductionDefinitions Logic Analyzer ModulesFS2343 Probe Description Probe Components Probe Technical Feature SummaryProbe overview Probe Set-upMechanical Brackets External Power supply Signal Assignments on Probe Pods Configuration filesLogic Analyzer card requirements Software Requirements Setting up the 169xx Analyzer169xx Licensing Page Channel Command labels Configuration File LabelsSampling labels Dram labelsDefault Trigger Dram commands A, B, C labels Symbol Symbol Value SymbolsChannel Commands A, B, C labels Symbol Symbol Value Preferences Below is a picture of the preference options Probe Settings Paddle card SettingsSM SMBus Control Probe Control Application Using the Probe Control SoftwareEvent Bus Cabling Loading the Probe Control SoftwareSetup SB Commands Store Qualification Trigger Events Event Bus State Analysis Operation Setting Sample PositionsPage State Display Offline AnalysisPage Page Appendix J9 Pods 1Odd and 2 EvenCLK SDA SCL J11 Pods 1Odd and 2 EvenSamtec J15 Pod 1Odd TRIGGER1 TRIGGER7 J12 Pods 1Odd and 2 EvenTRIGGER4 J10 Pods 1Odd and 2 Even Ground Anlyclk1n Odd DP16N/Odd Even DP16N/Even J13 Pods 1Odd and 2 Even TRIGGER3 General Information
Top Page Image Contents