Agilent Technologies FS2343 user manual J9 Pods 1Odd and 2 Even, Appendix

Page 33

Appendix

FS2343 Paddle Signal to Logic Analyzer Connector and Channel Mapping

The following table shows how the FS2343 Probe connects FBDIMM AMB signals to the logic analyzer pods and channels through the 100 pin Samtec connectors. Note that the configuration files described earlier use various combinations of these Pod connections.

The nomenclature is NB/SB for North or Southbound, Lx for Lane number, Bx for bit in during the rising edge of Anly_clkp, and _xx is the bit for the Dual sampled (second) point which is on the falling edge of Anly_clkp.

J9 - Pods 1(Odd) and 2 (Even)


		Signal	Logic Analyzer	SAMTEC	SAMTEC	Logic Analyzer	Signal
		name/Logical	Logic Analyzer	SAMTEC	SAMTEC	Logic Analyzer	Name/Logical
		name/Logical	channel number	Pin number	Pin number	channel number	Name/Logical
		Signal Name	channel number	Pin number	Pin number	channel number	Signal name
		Signal Name					Signal name

			Ground	1	2	Ground

			NC	3	4	NC

			Ground	5	6	Ground

		NB_L1_B0_6	Odd D0	7	8	Even D0	MODE

			Ground	9	10	Ground

		NB_L1_B4_10	Odd D1	11	12	Even D1	NB_L1_B2_8

			Ground	13	14	Ground

		NB_L0_B5_11	Odd D2	15	16	Even D2	FRAME

			Ground	17	18	Ground

		NB_L0_B3_9	Odd D3	19	20	Even D3	NB_L0_B4_10

			Ground	21	22	Ground

		NB_L1_B1_7	Odd D4	23	24	Even D4	NB_L2_B1_7

			Ground	25	26	Ground

		NB_L1_B5_11	Odd D5	27	28	Even D5	NB_L2_B0_6

			Ground	29	30	Ground

		NB_L0_B2_8	Odd D6	31	32	Even D6	NB_L1_B3_9

			Ground	33	34	Ground

		NB_L0_B1_7	Odd D7	35	36	Even D7	NB_L3_B2_8

			Ground	37	38	Ground

		NB_L2_B4_10	Odd D8	39	40	Even D8	NB_L3_B0_6

			Ground	41	42	Ground

					33

Image 33

Contents Fbdimm Interposer Probe FS2343 Product Warranty Symbols For Sales and Marketing Support For Technical SupportLimitation of warranty AssistanceExclusive Remedies Software License Agreement Probe Performance Limitation IntroductionDefinitions Logic Analyzer ModulesFS2343 Probe Description Probe Components Probe Technical Feature SummaryProbe Set-up Probe overviewMechanical Brackets External Power supply Configuration files Signal Assignments on Probe PodsLogic Analyzer card requirements Setting up the 169xx Analyzer Software Requirements169xx Licensing Page Channel Command labels Configuration File LabelsSampling labels Dram labelsDefault Trigger Dram commands A, B, C labels Symbol Symbol Value SymbolsChannel Commands A, B, C labels Symbol Symbol Value Preferences Below is a picture of the preference options Paddle card Settings Probe SettingsSM SMBus Control Probe Control Application Using the Probe Control SoftwareEvent Bus Cabling Loading the Probe Control SoftwareSetup SB Commands Store Qualification Trigger Events Event Bus State Analysis Operation Setting Sample PositionsPage State Display Offline AnalysisPage Page Appendix J9 Pods 1Odd and 2 EvenCLK SDA SCL J11 Pods 1Odd and 2 EvenSamtec J15 Pod 1Odd TRIGGER1 TRIGGER7 J12 Pods 1Odd and 2 EvenTRIGGER4 J10 Pods 1Odd and 2 Even Ground Anlyclk1n Odd DP16N/Odd Even DP16N/Even J13 Pods 1Odd and 2 Even TRIGGER3 General Information