Agilent Technologies FS2343 user manual General Information

Page 45

General Information

This chapter provides additional reference information including the characteristics and signal connections for the FS2343 FBDIMM Interposer Probe. The following operating characteristics are not specifications, but are typical operating characteristics.

Probe Connection

240 pin gold finger card edge connection at target (bottom) end of probe and card edge socket at the top edge of the probe both conforming to JEDEC spec MO-224.

Protocol supported

The FS2343 is designed to probe a DDR2 Fully Buffered DIMM system. Contact FuturePlus Systems for more detailed information.

Logic Analyzer required

169xx or PC running Agilent technologies 1680/90/900 software version 3.00.00 software, using 16753 or better, 1695x or better cards.

Logic Analyzer Adapter Cables required

	Logic Analyzer	Termination	Number Required
	card	Adapter	Number Required
	card	Adapter
	16760,	E5378A	6
	16753/4/5/6,	E5378A	6
	16950

Service requirements

If a failure is suspected in the FS2343 Probe contact the factory or your FuturePlus Systems authorized distributor.

The repair strategy for the probe is for the product to be returned to the factory upon factory approval.

45

Image 45

Contents Fbdimm Interposer Probe FS2343 Product Warranty Symbols For Sales and Marketing Support For Technical SupportLimitation of warranty AssistanceExclusive Remedies Software License Agreement Probe Performance Limitation IntroductionDefinitions Logic Analyzer ModulesFS2343 Probe Description Probe Components Probe Technical Feature SummaryProbe Set-up Probe overviewMechanical Brackets External Power supply Configuration files Signal Assignments on Probe PodsLogic Analyzer card requirements Setting up the 169xx Analyzer Software Requirements169xx Licensing Page Channel Command labels Configuration File LabelsSampling labels Dram labelsDefault Trigger Dram commands A, B, C labels Symbol Symbol Value SymbolsChannel Commands A, B, C labels Symbol Symbol Value Preferences Below is a picture of the preference options Paddle card Settings Probe SettingsSM SMBus Control Probe Control Application Using the Probe Control SoftwareEvent Bus Cabling Loading the Probe Control SoftwareSetup SB Commands Store Qualification Trigger Events Event Bus State Analysis Operation Setting Sample PositionsPage State Display Offline AnalysisPage Page Appendix J9 Pods 1Odd and 2 EvenCLK SDA SCL J11 Pods 1Odd and 2 EvenSamtec J15 Pod 1Odd TRIGGER1 TRIGGER7 J12 Pods 1Odd and 2 EvenTRIGGER4 J10 Pods 1Odd and 2 Even Ground Anlyclk1n Odd DP16N/Odd Even DP16N/Even J13 Pods 1Odd and 2 Even TRIGGER3 General Information