Invacare Excelerator XLT 2000 manual Excelerator XLT/XLT 2000 Assembly Procedures Figure

ASSEMBLY PROCEDURES PROCEDURE 3

EXCELERATOR XLT/XLT 2000 ASSEMBLY PROCEDURES (FIGURE 2)

NOTE: Invacare recommends that the following pro- cedures be performed by a qualified technician.

Tools required:

Adjustable Wrench (10-12-inches) 5, 8 and 32 mm Wrench 3/16-inch Allen Wrench 1/4-inch Allen Wrench

1/2-inch Box Wrench 1/2-inch Socket Wrench

Two (2) Medium Screwdrivers (Flathead and Phillips)

1.Secure and adjust rear wheels (PROCEDURE 4).

2.Adjust hand crank assembly (PROCEDURE 5).

3.Adjust chain (PROCEDURE 7).

4.Adjust the optional cantilever brake cable (PROCE- DURE 8).

5.Adjust parking brake (PROCEDURE 8).

6.Adjust back height and/or angle (PROCEDURE 9).

7.Adjust seat position/upholstery (PROCEDURE 10).

8.Adjust footrest (PROCEDURE 11).

9.Check that all hardware is tight.

A S S E M B L Y

P R O C E D U R E

	EXCELERATOR XLT
	PROCEDURE 10
PROCEDURE 9	PROCEDURE 5
	PROCEDURE 7
PROCEDURE 4	PROCEDURE 8

PROCEDURE 11

	EXCELERATOR XLT 2000
	PROCEDURE 10
PROCEDURE 9	PROCEDURE 7
	PROCEDURE 8

PROCEDURE 4	PROCEDURE 5
	PROCEDURE 11
	FIGURE 2 - EXCELERATOR XLT/XLT 2000 ASSEMBLY PROCEDURES

S

11