Invacare Li'l Execelerator, Excelerator XLT 2000 manual Excelerator XLT Chain Adjustment

CHAIN PROCEDURE 7

Crank

Handles

Fork

Socket

Screws

FIGURE 3 - EXCELERATOR - XLT CHAIN ADJUSTMENT

EXCELERATOR XLT/XLT 2000 CHAIN INSTALLATION - TWENTY- FOUR (24) OR TWENTY-SEVEN (27) SPEED CASSETTE (FIGURE 4)

1.Spread the chain out flat and run it around the chain ring on the crank and the sprocket on the hub.

NOTE: It may be necessary to turn the hand crank in a clockwise motion to position the chain on the small sprocket.

2.Ensure that crank assembly is loosened and mov- able.

3.Lift UP on the chain derailleur and thread the chain under the derailleur.

4.Thread the chain around the wheel sprocket.

5.Run the chain around the BOTTOM of the wheel sprocket and back up towards the hand crank sprocket.

6.Attach the chain together using the master link (w/ clip) provided.

7.To tension chain, refer to EXCELERATOR XLT/XLT 2000 FORK/CRANK ASSEMBLY REPLACEMENT in PROCEDURE 5 of this manual.

Step 5

Hand Crank Sprocket

Assembly

Step 3

Step 4

Chain Derailleur and

Wheel Sprocket

FIGURE 4 - EXCELERATOR XLT/XLT 2000 CHAIN INSTALLATION- TWENTY-FOUR (24) OR TWENTY- SEVEN (27) SPEED CASSETTE

C H A I N

21